A clear deck space of 60 inches (1524 mm) minimum by 60 inches (1524 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer wall....
Search Results "Minimum Dimension"
-
11B-1009.4.1 Clear deck space
-
11B-809.10.8.1 Location
Lavatories without base cabinets shall be installed with the centerline 18 inches (457 mm) minimum from an adjoining wall or fixture to allow for forward approach....
-
11B-809.10.6.4 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: Continuous reinforcement shall be installed in the walls of showers 30 inches (762 mm) maximum to 38 inches (965 mm) minimum...
-
1009.4.1 Clear Deck Space
A clear deck space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer wall....
-
607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum....
-
1009.2.3 Clear Deck Space
The space shall be 36 inches (915 mm) wide minimum and shall extend forward 48 inches (1220 mm) minimum from a line located 12 inches (305 mm) behind the rear edge of the seat....
-
Q2.) What are the types of “field conditions” that were anticipated where the advisory says “tolerances recognized by this provision include those for field conditions”?
Those are usually the dimensions that can safely be considered industry tolerances. ...
-
3.3.5 Seat Height
3.3.5 Seat Height Height dimension standards for seats prescribed in the Australian, Canadian and U.S. standards were very similar (480 mm or 18.9 in., 480 mm or 18.9 in. and 485 mm...
-
Suggested accessibility guidelines for exterior concrete surfaces
However, the ACI standards do not permit interpolation or extrapolation for dimension greater than or less than 10 feet....
-
Areas for further work
Measurement instruments Accuracy of instruments/measurement uncertainty Use of significant figures Metric conversions or dual unit standards Measurement of dimensions...
-
2004 ADA and ABA Accessibility Guidelines
The Access Board is also considering additional technical criteria based on the 2004 ADA and ABA Accessibility Guidelines for cross section dimensions and clearances around gripping surfaces...
-
4.1.7(3) Historic Preservation
(3) Historic Preservation: Minimum Requirements:...
-
Omnia Industries Inc. Square Rose Exterior Modern Mortise Entrance Lever Lockset - Solid Brass No.2036SF
Square Rose Exterior Modern Mortise Entrance Lever Lockset - Solid Brass Dimensions: Rose: 7/16" projection x 2-9/16" square Turnpiece: 1-1/2" x 1/4", 1-1/8" projection, 1-7/16" square...
-
Fifi Small Interior Wall Sconce by Hampstead
Dimensions: L:15.75" E:3" Diffuser: Laser Cut Steel Finish: White, Bronze, Gold and Silver Certification: cUL Options: White: 1 x 24W 2G11: #46038 Gold: 1 x 24W 2G11: #46040...
-
Fifi Large Interior Wall Sconce by Hampstead
Dimensions: L:23.75" E:3" Diffuser: Laser Cut Steel Finish: White, Bronze, Gold and Silver Certification: cUL Options: White: 1 x 55W 2G11: #46042 Gold: 1 x 55W 2G11: #46044...
-
Dodo 12 Interior Wall Sconce by Hampstead
Dimensions: D:8" H:12" E:3" Diffuser: Blown Glass Number of Diffuser: 1 Finish: Satin Nickel Color: Topaz Certification: ADA and cUL Options: Satin Nickel: 60W Torpedo...
-
Delta Vero™ Single Handle Centerset Lavatory Faucet with Riser Less Pop-Up 753LF
Drain assembly sold separately Meets standards set by Americans with Disabilities Act (ADA) 1.50 gpm @ 60 psi, 5.7 L/min @ 414 kPa Single hole installation Rigid spout Assembled dimensions...
-
11B-1007.2 Accessible routes
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (813 mm) minimum. 3. ...
-
11B-1007.2 Accessible routes
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (813 mm) minimum. 3....
-
11B-502.5 Vertical clearance
Parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. [2010 ADA Standards] 502.5 Vertical Clearance....
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
11B-406.5.10 Diagonal curb ramps
Diagonal curb ramps with flared sides shall have a segment of curb 24 inches (610 mm) long minimum located on each side of the curb ramp and within the marked crossing....
-
The Target Population
For many dimensions women represent the smaller end of the distribution....
-
3.3.3. Captioning Device Scoping Requirements
The Joint Comment suggested that movie theaters maintain a minimum number of captioning devices based on the number of auditoriums displaying digital movies within a movie theater, or by...
