Car doors shall be positioned at the narrow ends of cars and shall provide 32 inches (815 mm) minimum clear width. EXCEPTIONS: 1....
Search Results "Horizontal Position"
-
408.4.1 Car Dimensions and Doors
-
Driving Ranges
This will allow a person who plays golf from a golf car to practice driving a golf ball from the same position and stance used when playing the game....
-
5.7.1.1 Lift Compatibility Clearance in Base for Stretchers (M301)
For stretchers with a shorter wheelbase than “standard,” the clearance for a lift may use both the clearance in the base and the clearance around the base to position the lift around the...
-
1002.5 Amusement Ride Seats Designed for Transfer
Amusement ride seats designed for transfer shall comply with 1002.5 when positioned for loading and unloading. Advisory 1002.5 Amusement Ride Seats Designed for Transfer....
-
Facility
A clear floor space complying with 305 positioned for a forward approach shall be provided....
-
604.2 Location
The water closet shall be positioned with a wall or partition to the rear and to one side....
-
604.5.2 Rear Wall
Where an administrative authority requires flush controls for flush valves to be located in a position that conflicts with the location of the rear grab bar, then the rear grab bar shall...
-
11B-405.7.5 Doorways
Doors, in any position, shall not reduce the minimum dimension of the ramp landing to less than 42 inches (1067 mm). [2010 ADAS] 405.7.5 Doorways. ...
-
4.4.4 Clear Floor or Ground Space
Shoulder alignment generally can be achieved by positioning the back of the bench so it is 8 inches (200 millimeters) closer to the outdoor recreation access route, trail, or beach access...
-
1014.2.1 Transfer Access
Where transfer access is provided, this section requires a clear ground space 36 inches minimum by 48 inches minimum positioned for a parallel approach to be provided at the entrance to...
-
11B-405.7.5 Doorways
Doors, in any position, shall not reduce the minimum dimension of the ramp landing to less than 42 inches (1067 mm). [2010 ADAS] 405.7.5 Doorways....
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading....
-
1134A.4 Sufficient maneuvering space
The clear maneuvering space shall allow the user to position a wheelchair or other mobility aid clear of the path of the door as it is closed and to permit use of fixtures....
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading....
-
1134A.4 Sufficient maneuvering space
The clear maneuvering space shall allow the user to position a wheelchair or other mobility aid clear of the path of the door as it is closed and to permit use of fixtures....
-
Measures and Procedures
The subjects were asked to position themselves next to the platform as they normally would to prepare for a transfer....
-
Taking Measurements
This is the “level” position. While the level is in this position, measure the distance between the end of the level and the sloped surface below....
-
Kitchen Appliances and Fixtures
food odors) Extra long “C” grips on appliances Espresso machine that makes steamed milk taste like cream Pop-up shelf usable from a wheelchair or from a standing position...
-
11B-604.8.1.1 Size
The minimum space required in toilet compartments is provided so that a person using a wheelchair can maneuver into position at the water closet....
-
Gamco Swing Up Grab Bar - 125-Swing-Up
Detent holds bar in vertical position. Back Plate - 3/16" (4.5mm) thick, one piece stainless steel design....
-
Kompan, Inc. Solitaires Spinners Navigator ELE400007
The platform can be turned around and re-positioned, which is enjoyable for young sailors who like to control the direction of their journey....
-
DORMA BTS80 EMB Series Door Closer
The closer is typically placed into the hold open position until a fire alarm condition....
-
Bosch 3-Point Self-Leveling Alignment Laser GPL 3
Multi-purpose attachment positions the mount with magnets, strap or threaded mounts (5/8" to 11, 1/4" to 20)....
