The maximum travel distance from any accessible space to an area of refuge shall not exceed the exit access travel distance permitted for the occupancy in accordance with Section 1017.1....
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
-
1009.6.1 Travel distance
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-809.10.7.4 Seat height
Water closet seats shall be 15 inches (381 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat above the finish floor....
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground....
-
12143(a)(2)
(2) in the case of response time, which is comparable, to the extent practicable, to the level of designated public transportation services provided to individuals without disabilities using...
-
Universal Design
Universal Design—The principle that programs and facilities must be designed to be usable by all people, to the greatest extent possible, without separate or segregated access for people...
-
[A] 101.4 Referenced codes
The other codes listed in Sections 101.4.1 through 101.4.6 and referenced elsewhere in this code shall be considered part of the requirements of this code to the prescribed extent of each...
-
101.4 Referenced codes
The other codes listed in Sections 101.4.1 through 101.4.7 and referenced elsewhere in this code shall be considered part of the requirements of this code to the prescribed extent of each...
-
Section 35.151(i) Curb Ramps (Section-by-Section Analysis)
The phrase "other sloped areas" lacks technical precision. Both the 1991 Standards and the proposed standards provide technical guidance for the installation of curb ramps....
-
Format and Organization
The proposed rule would have established the scoping and technical requirements for camping facilities, picnic facilities, viewing areas, trails, and beach access routes as separate guidelines...
-
Paths to Employment Resource Center
Using the most innovative training and technical assistance strategies, PERC addresses how employment can be achieved by people with disabilities and promotes a cohesive service system that...
-
National Institute of Building Sciences (NIBS)
Through the Institute, Congress established a public/private partnership to enable findings on technical, building-related matters to be used effectively to improve government, commerce...
-
11B-411.2.1.2.3 Accessibility function button
Each dot shall have a base diameter of 0.059 inch (1.5 mm) minimum and 0.063 inch (1.6 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
11B-604.7 Dispensers and disposal units
Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of the water closet measured to the centerline of the dispenser...
-
11B-411.2.1.2.3 Accessibility function button
Each dot shall have a base diameter of 0.059 inch (1.5 mm) minimum and 0.063 inch (1.6 mm) maximum and a height of 0.025 inch (0.6 mm) minimum and 0.037 inch (0.9 mm) maximum....
-
11B-604.7 Dispensers and disposal units
Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of the water closet measured to the centerline of the dispenser...
-
Grainger Tough Guy Stainless Steel Sanitary Napkin Receptacle, 11" Height
Model# 1ECK9 Catalog Page# 1609 UNSPSC# 47121702 Shipping Weight: 3.28 lbs Technical Specs Item Sanitary Napkin Receptacle Container Mounting Style Wall or Free-Standing...
-
Behavioral Safety Products #GB350 Suicide Resistant Safety Grab Bar with Full Closure Plate
These bars meet heavy duty standards for psychiatric and behavioral applications with full closure plates per the specifications in the technical data link....
-
Speakman Neo Double Robe Hook SA-1008
Technical Specifications Solid metal construction Two customizable prongs Includes mounting hardware...
-
Facility
All or any portion of buildings, structures, site improvements, elements, and pedestrian routes or vehicular ways located on a site....
