End doors and gates shall provide a clear width 32 inches (813 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
Search Results "Shower Clear Floor Space"
Filters
Commonly Searched Documents
-
11B-410.6 Doors and gates
-
5.8.2.4 Unobstructed Floor Space
5.8.2.4 Unobstructed Floor Space. The unobstructed floor space in front of the base support should be a minimum of 17 inches deep....
-
Wheelchair Spaces: ADA Standard Section 206.7.2
Section 206.7.2 covers scoping requirements in the most current ADA Standards for accessible routes to wheelchair spaces.
-
Delta ADA Grab Bar Hand Shower Mount U6300-WH
Product Features and Benefits Fits 1 1/2″ or 11/4″ grab bars Rotatable hand shower mount Lifetime Faucet and Finish Warranty ADA Compliant...
-
Benches [1011.2]
A minimum of 36 by 48 inches of clear ground space must be provided near a bench, with one side of the clear space adjoining an ORAR or trail as applicable....
-
408.4.2 Floor Surfaces
408.4.2 Floor Surfaces. Floor surfaces in elevator cars shall comply with 302 and 303....
-
11B-703.2.8 Line spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height....
-
11B-808.2 Turning space
Where provided, areas that are raised or depressed and accessed by ramps or platform lifts with entry ramps shall provide unobstructed turning space complying with Section 11B-304....
-
FUNCTIONAL SPACES
The rooms and spaces in a building or facility that house the major activities for which the building or facility is intended....
-
ACCESSIBLE SPACE
[DSA-AC & HCD 1-AC] A space that complies with the accessibility provisions of this code....
-
ACCESSIBLE SPACE
[DSA-AC & HCD 1-AC] A space that complies with the accessibility provisions of this code....
-
11B-609.3 Spacing
The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm) minimum....
-
11B-609.3 Spacing
11B-609.3 Spacing. The space between the wall and the grab bar shall be 1½ inches (38 mm)....
-
4.3.5.2 180-degree turn
The 1525 mm (60 in.) turning space would be used instead....
-
Gamco Folding Shower Seat, Ivory Phenolic - 5191
Description Compact design. Seat is constructed of durable, water-resistant, ivory-colored, 5/16" (8mm) thick solid phenolic. Frame and mounting bracket are type 304 stainless...
-
Delta Single Function Hand Shower with Grab Bar
Product Features and Benefits Two-setting white hand shower Two integral check valves for backflow protection Features Touch-Clean spray holes Push button...
-
R304.2.1 Turning Space
R304.2.1 Turning Space....
-
R304.3.1 Turning Space
R304.3.1 Turning Space....
-
11B-221.2 Wheelchair spaces
Wheelchair spaces complying with Section 11B-221.2 shall be provided in assembly areas with fixed seating....
-
11B-809.10.6.4 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: Continuous reinforcement shall be installed in the walls of showers 30 inches (762 mm) maximum to 38 inches (965 mm) minimum...
-
Line Spacing: ADA Standard Section 703.5.9
Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height....
-
11B-609.3 Spacing
The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm) minimum....
-
Inpro Corporation JointMaster® 787 Series Floor Expansion Joint Covers
cover plate for added slip resistance Integral, high durometer seal deters water from entering the system and acts as a noise dampening device Key Specifications Floor...
-
T502.3.1 Clear Width
Doorways shall provide a clear opening of 32 inches (810 mm) minimum....
