ASTM INTERNATIONAL STANDARD Computing Pathway Roughness Index from Longitudinal Profile Measurements1 1This standard practice is under the jurisdiction of ASTM Committee E17 on Vehicle-Pavement...
Search Results "Rail Vehicle"
-
APPENDIX D
-
§ 38.71(b)(2)
(2) Vehicles designed for, and operated on, pedestrian malls, city streets, or other areas where level boarding is not practicable shall provide wayside or car-borne lifts, mini-high platforms...
-
§ 38.159(d)(1) Design load
Securement systems, and their attachments to vehicles, shall restrain a force in the forward longitudinal direction of up to 2,000 pounds (8,880 N) per securement leg or clamping mechanism...
-
Rebuilding Together Caroline County - Denton, MD
Each year, 275,000 volunteers all over our nation tackle the sagging roofs, leaky pipes, shaky railings, peeling paint and rotting steps that plague low-income homeowners who dont have the...
-
R304.5.5 Clear Space
bottom grade break, a clear space 1.2 m (4.0 ft) minimum by 1.2 m (4.0 ft) minimum shall be provided within the width of the pedestrian street crossing and wholly outside the parallel vehicle...
-
§ 37.77(b)
service to individuals with disabilities, including individuals who use wheelchairs, equivalent to the level of service it provides to individuals without disabilities, it may purchase new vehicles...
-
§ 37.123(f)(2)
(2) Additional individuals accompanying the ADA paratransit eligible individual shall be provided service, provided that space is available for them on the paratransit vehicle carrying the...
-
§ 38.159(d)(5) Movement
with manufacturer's instructions, the securement system shall limit the movement of an occupied wheelchair or mobility aid to no more than 2 inches (50 mm) in any direction under normal vehicle...
-
Door and Gate Surfaces: ADA Standard Section 404.2.10
Section 404.2.10 covers the current ADA Standards for door and gate surfaces on manual doors and gates.
-
Restaurants and Cafeterias: ADA Standard Section 206.2.5
Section 206.2.5 covers scoping requirements in the most current ADA Standards for accessible routes in restaurants and cafeterias
-
11B-404.2.10 Door and gate surfaces
Tempered glass doors without stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch...
-
11B-404.2.10 Door and gate surfaces
Tempered glass doors without stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch...
-
4.26.2* SIZE AND SPACING OF GRAB BARS AND HANDRAILS
Handrails may be located in a recess if the recess is a maximum of 3 in (75 mm) deep and extends at least 18 in (455 mm) above the top of the rail (see Fig. 39(d))....
-
F228 Depositories, Vending Machines, Change Machines, and Mail Boxes
In the final rule, the Board has exempted coverage of fuel dispensers used only for fueling official government vehicles, such as postal and military vehicles....
-
R302.6.1 Pedestrian Street Crossings Without Yield or Stop Control
At pedestrian street crossings without yield or stop control, vehicles can proceed through the intersection without slowing or stopping....
-
Parking Spaces [4.6.3]
A maximum slope of 2% is required in all directions for both the space and access aisle since level surfaces are important for wheelchair transfer to and from vehicles....
-
Location [4.6.2] and Dispersion
Since people who use wheelchairs may not be as visible from a vehicle, it is recommended that accessible routes be configured to prevent or minimize wheelchair travel behind parked vehicles...
-
11B-705.2 Detectable directional texture
This surface will be placed directly behind the yellow detectable warning texture specified in Section 11B-705.1.2.1, aligning with all doors of the transit vehicles where passengers will...
-
49 CFR Parts 27 and 37: Transportation for Individuals With Disabilities; Reasonable Modification of Policies and Practices - Preamble
questions related to transit, you may contact Bonnie Graves, Office of Chief Counsel, Federal Transit Administration, same address, Room E56-306, 202-366-0944, bonnie.graves@dot.gov; and, for rail...
-
4. Comparison of Proposed Technical Provisions Applicable to Shared Use Paths and AASHTO Guide
Where pedestrian access routes cross rails at grade, the pedestrian access route surface shall be level and flush with the top of rail at the outer edges of the rails, and the surface between...
-
12149(b) Standards
(b) Standards The regulations issued under this section and section 12143 of this title shall include standards applicable to facilities and vehicles covered by this part....
-
A4.6.3 PARKING SPACES
When optional van spaces are provided within a garage, only the spaces themselves and a vehicle route to them require the specified clearances....
-
§ 37.197(a)(2)
useful life for five years or more, where the purchase or lease occurs after the date on which this subpart applies to the entity and during the period in which the useful life of the vehicle...
