Openings in walking surfaces shall not allow the passage of a sphere more than 5/8 inch (16 mm) in diameter....
Search Results "End Transfer Surface"
Commonly Searched Documents
-
T302.3 Openings
-
1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951 (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
10.3.1(19)
Gates which must be pushed open by wheelchair or mobility aid users shall have a smooth continuous surface extending from 2 inches above the floor to 27 inches above the floor....
- Kompan, Inc. Elements Play Structures Ridge ELE500003
- Kompan, Inc. Elements Play Structures Tower ELE400050
-
1013.3 Slope
The slope of the surface of tent pads, tent platforms, and clear ground spaces shall not be steeper than 1:48 in any direction....
-
1013.3 Slope
The slope of the surface of tent pads, tent platforms, and clear ground spaces shall not be steeper than 1:48 in any direction....
-
Playground Study Site
A transfer point/platform was incorporated in the climbing structure; however, the surface leading to it was fine beach sand. Total fall height was determined to be 3.1 m (10 ft)....
-
1133A.4, Item 3
Sinks and work surfaces may be a single integral unit a minimum of 60 inches (1524 mm) in length, or be separate components....
-
1133A.4, Item 3
Sinks and work surfaces may be a single integral unit a minimum of 60 inches (1524 mm) in length, or be separate components....
- GE Artistry⢠Series 30" Free-Standing Electric Range ABS45DFWS
-
Allowances for Typical Roadway Geometry
for Typical Roadway Geometry The 1991 ADAAG and 2004 ADA and ABA Accessibility Guidelines specify a maximum running slope of 5 percent and maximum cross slope of 2 percent for walking surfaces...
- Varidesk LLC. Pro Desk 60⢠Height-Adjustable Standing Desk
- Diversified Woodcrafts Forward Vision ADA Workstation 2956KF-L-ADA
-
505.7 Cross Section
Handrail gripping surfaces shall have a cross section complying with 505.7.1 or 505.7.2....
-
505.7 Cross Section
Handrail gripping surfaces shall have a cross section complying with 505.7.1 or 505.7.2....
-
505.7 Cross Section
Handrail gripping surfaces shall have a cross section complying with 505.7.1 or 505.7.2....
- Diversified Woodcrafts Forward Vision ADA Workstation 2946KF-L-ADA
-
A. Measuring Slope and Cross Slope
First, observe the general slope of the surface and place the builders' level on the pavement at the steepest point parallel to the direction of the slope....
-
M304.3 Standing Supports
Standing supports shall be provided on each side of the standing surface and shall comply with M305.3....
-
610.3 Shower Compartment Seats
In transfer-type showers, the seat shall extend from the back wall to a point within 3 inches (75 mm) of the compartment entry....
- GEĀ® 24" Standard Clean Free-Standing Gas Range JGAS02SENSS
-
Question 5
Is the surface of the accessible route to the entrance smooth and free of large cracks and broken or raised areas?...
-
11B-505.7 Cross section
Handrail gripping surfaces shall have a cross section complying with Section 11B-505.7.1 or 11B-505.7.2....