TTYs in public buildings shall be provided in accordance with Section 11B-217.4.2.1. TTYs in private buildings shall be provided in accordance with Section 11B-217.4.2.2.
Search Results "Court Floor Holding Cell"
-
11B-217.4.2 Floor requirement
-
Pricilla Rogers, Ph.D., Center on Vision Loss, American Foundation for the Blind
Use the flooring to create a building map such as the use of differences in flooring texture and color contrast. Use of contrast on door frames....
-
11B-231.4.1 Cubicles and counters
Exception: The detainee side of cubicles or counters at non-contact visiting areas not serving holding cells required to comply with Section 11B-231 shall not be required to comply with...
-
1.16 Traditional, sloped-floor or traditional seating
1.16 "Traditional, sloped-floor" or "traditional seating" shall mean and refer to the section of an auditorium in which the seats are not affixed on risers, but are instead affixed to...
-
502.4 Floor or Ground Surfaces
Advisory 502.4 Floor or Ground Surfaces. Access aisles are required to be nearly level in all directions to provide a surface for wheelchair transfer to and from vehicles....
-
Olmstead Decision
Supreme Court issues the landmark Olmstead v....
-
502.4 Floor or Ground Surfaces
Advisory 502.4 Floor or Ground Surfaces. Access aisles are required to be nearly level in all directions to provide a surface for wheelchair transfer to and from vehicles....
-
231 Judicial Facilities
This section covers courthouses and other judicial facilities and provides requirements for courtrooms (231.2), holding cells (231.3), and visiting areas (231.4)....
-
11B-231.4.1 Cubicles and counters
Exception: The detainee side of cubicles or counters at non-contact visiting areas not serving holding cells required to comply with Section 11B-231 shall not be required to comply with...
-
11B-231.4.1 Cubicles and counters
Exception: The detainee side of cubicles or counters at non-contact visiting areas not serving holding cells required to comply with Section 11B-231 shall not be required to comply with...
-
405.9.1 Extended Floor or Ground Surface
The floor or ground surface of the ramp run or landing shall extend 12 inches (305 mm) minimum beyond the inside face of a handrail complying with 505....
-
805 Medical Care and Long-Term Care Facilities
A similar requirement was included for transient lodging guest rooms (806.2.6) and holding and housing cells (807.2.1). Response....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
703.4.1 Height above Finish Floor or Ground
703.4.1 Height above Finish Floor or Ground....
-
Tormax Technologies iMotion® TN 110 In-Floor Swing Door Operator (High and Low Energy)
iMotion® TN 110 In-Floor Swing Door Operator (High and Low Energy) The iMotion® TN 110 In-Floor swing Door Operator (High and Low Energy) is the best choice for door automation in demanding...
-
703.4.1 Height above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
809.5.6 Site, Building, or Floor Entrance
809.5.6 Site, Building, or Floor Entrance....
-
Regulatory Impact Analysis.
An initial regulatory impact analysis of the costs and benefits of a proposed rule is required by Executive Order 12866 (as amended by Executive Order 13258 and Executive Order...
