Several different types of accessible seating are required in an assembly seating area....
Search Results "Patient Change Area"
-
11B-221.1 General
-
11B-221.1 General
Several different types of accessible seating are required in an assembly seating area....
-
Balco FMS-A and FMS-V Roll-Up Floor Mat
Balco's Premium Roll-Up Mat is a Vinyl Hinge Construction with Standard Mill Finish Aluminum; Clear Anodized, and Medium Bronze Anodized Finishes Available. Balco's versatile series...
-
F246.4 Outdoor Recreation Access Routes
At least one outdoor recreation access route complying with 1016 shall connect accessible parking spaces or other arrival points serving the viewing area with accessible elements, spaces...
-
b. Exception for Base Support Allowance and Unobstructed Knee and Toe Space
In addition, the Access Board has found that the profile of the base components should increase toward the rear of the clearance space where a patient’s foot and toes will be higher than...
-
1012.3 Opening limitations
In areas which are not open to the public within occupancies in Group I-3, F, H or S, balusters, horizontal intermediate rails or other construction shall not permit a sphere with a diameter...
-
Golf Facilities: ADA Standard Section 206.2.15
Section 206.2.15 covers scoping requirements in the most current ADA Standards for accessible routes to golf facilities
-
M301.4.1 Clearance in Base
[See subsections ...]
-
5.8.1.2 Entry to Wheelchair Spaces on Raised Platforms
The proposed provision includes technical criteria for changes in level at the entry of a wheelchair space....
-
F202.6.5.5 Assembly Areas
Assistive listening systems shall comply with F219 and assembly seating shall comply with F221.
-
5.3 TABLEWARE AREAS
Install tableware, dishware, condiment, food and beverage display shelves, and dispensing devices in compliance with 4.2 (see Fig. 54).
-
Accessible Routes: ADA Standard Section 1006.2
, bag drop areas, and course toilet rooms shall comply with Chapter 4 and shall be 48 inches (1220 mm) wide minimum....
-
11B-1006.2 Accessible routes
, bag drop areas, and course toilet rooms shall comply with Division 4 and shall be 48 inches (1219 mm) wide minimum....
-
11B-1006.2 Accessible routes
, bag drop areas, and course toilet rooms shall comply with Division 4 and shall be 48 inches (1219 mm) wide minimum....
-
4.3.11.1(6)
Smoke barriers shall have a fire-resistive rating of not less than one hour and shall completely enclose the area or room....
-
11B-206.2.15 Golf facilities
In addition, accessible routes serving golf car rental areas; bag drop areas; course weather shelters complying with Section 11B-238.2.3; course toilet rooms; and practice putting greens...
-
11B-206.2.15 Golf facilities
In addition, accessible routes serving golf car rental areas; bag drop areas; course weather shelters complying with Section 11B-238.2.3; course toilet rooms; and practice putting greens...
-
§ 36.406(f) Assembly areas
(f) Assembly areas. ...
-
§ 36.406(f) Assembly areas
(f) Assembly areas....
-
Hybrid Surface Systems
After 12 months of installation, the top layer carpet began to shrink and separate at the seams creating openings and changes in level greater than ½ inch. ...
-
5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations
The limitation on edge protection height will reduce the possibility that the edge protection will interfere with the patient’s footrest. 5.8.1.2.2 Single Ramp Scale with Edge Protection...
-
1008.2.4.1 Ground Level
In play areas less than 1000 square feet (93 m2), the clear width of accessible routes shall be permitted to be 44 inches (1120 mm) minimum, if at least one turning space complying with...
-
1008.2.4.1 Ground Level
In play areas less than 1000 square feet (93 m2), the clear width of accessible routes shall be permitted to be 44 inches (1120 mm) minimum, if at least one turning space complying with...
-
1008.2.4.1 Ground Level
In play areas less than 1000 square feet (93 m²), the clear width of accessible routes shall be permitted to be 44 inches (1120 mm) minimum, if at least one turning space complying with...
