Hand operated flush controls shall comply with Sections 11B-309.2 and 11B-309.4 and shall be installed 36 inches (914 mm) maximum above the finish floor....
Search Results "Maximum Reach Depth"
-
11B-604.9.5 Flush controls
-
R408.5 Nosings
The radius of curvature at the leading edge of the tread shall be 13 mm (0.5 inch) maximum....
-
607.4.1.1 Back Wall
Two grab bars shall be installed on the back wall, one located in accordance with 609.4 and the other located 8 inches (205 mm) minimum and 10 inches (255 mm) maximum above the rim of the...
-
Bobrick ClassicSeries Recessed Waste Receptacle B-3644
Rough Wall Opening: 16" W, 29 1/4" H, 4" min. depth (405 x 745 x 100mm)....
-
Clarification on Standard Roll-In Shower Compliance
Since there’s no maximum length for a side wall in a standard roll-in shower, do you think a pull-down grab bar would still be allowed?...
-
Syngas Fuel Saver: Improve Fuel Efficiency and Lower Operating Costs
Power industrial furnaces Produce chemicals like methanol and ammonia Replace conventional fossil fuels in certain applications However, raw syngas still requires optimization for maximum...
-
Controls for Ranges and Cooktops
Accordingly, a specification that controls for ranges and cooktops be placed so that they can be used without reaching across burners is not consistent with the Act's requirement for usable...
-
16(b)
After the Parties reach agreement on the Survey Instrument, HWI will work with an ADA Consultant mutually agreeable to the Parties (the “ADA Consultant”) to create a training video to educate...
-
11B-809.8.1 Door Thresholds
Secondary exterior door thresholds, including sliding door tracks, shall be 3/4 inch (19.1 mm) high maximum with a 1:2 maximum slope....
-
11B-505.6 Gripping surface
People with disabilities, older people, and others benefit from continuous gripping surfaces that permit users to reach the fingers outward or downward to grasp the handrail, particularly...
-
11B-505.6 Gripping surface
People with disabilities, older people, and others benefit from continuous gripping surfaces that permit users to reach the fingers outward or downward to grasp the handrail, particularly...
-
Gripping Surface: ADA Standard Section 505.6
Section 505.6 covers the current ADA Standards for the handrail gripping surface.
-
Jean Tessmer
Meets all ADA reach and operability requirements, They also sell the track system....
-
Cricket Records that Will Never be Broken
Achieved through rare combinations of skill, longevity, and consistency, these records seem increasingly out of reach in today’s fast-evolving formats and packed schedules....
-
Kawneer North America NX-8900 Terrace Doors
4" (101.6mm) sightline 2-3/4" (69.9mm) depth 3-1/4" (82.6mm) or 4-5/8" (117.5mm) frame depth High thermal performance Moderate traffic application FEATURES: NexGen™...
-
504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (13 mm) maximum....
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
504.5 Nosings
The radius of curvature at the leading edge of the tread shall be 1/2 inch (13 mm) maximum....
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
-
Flush Controls on Toilets
Hand operated flush controls shall comply with 309.2 and 309.4 and shall be installed 36 inches (915 mm) maximum above the finish floor....
-
Bobrick TrimLineSeries Recessed Seat Cover Dispenser B-3013
Rough Wall Opening: 15 5⁄8" W, 11 1⁄4" H, 2 3⁄4" min. depth (395 x 285 x 70mm)....
-
Bobrick ConturaSeries Recessed Waste Receptacle with LinerMate B-43644
Rough Wall Opening: 15 7/8" W, 26 1/4" H, 4" min. depth (405 x 665 x 100mm)....
-
11B-809.10.7.5 Controls
Controls shall be mounted 44 inches (1118 mm) maximum above the finish floor. The force required to activate controls shall be 5 pounds (22.2 mm) maximum....
