A minimum linear length of 30 inches (762 mm) of countertop shall be provided for the kitchen sink installation....
Search Results "Sink Depth"
Filters
Commonly Searched Documents
-
1133A.4, Item 1
-
4.24.3 Knee Clearance
Knee clearance that is at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided underneath sinks....
-
4.24.3 KNEE CLEARANCE
Knee clearance that is at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided underneath sinks....
-
Elements Exempted in Final Rule
The proposed rule included proposed scoping and technical requirements for utility sinks and pit toilets....
-
11B-306.2.3 Minimum required depth
Exceptions: The toe clearance shall extend 19 inches (483 mm) minimum under sinks required to be accessible by Section 11B-212.3....
-
308.3 Side Reach
308.3 Side Reach
-
11B-308.3 Side reach
[See subsections ...]
-
308.3 Side Reach
308.3 Side Reach.
-
308.3 Side Reach
308.3 Side Reach.
-
308.3 Side Reach
[See subsections ...]
-
Height [4.18.2]
Height [4.18.2] The rim of an accessible urinal must be no higher than 17 inches above the finished floor. The rim must be "elongated," but a minimum horizontal projection is not...
-
308.3 Side Reach
[See subsections ...]
-
Side Reach Radius
Elements located in corners can be difficult to reach from a side approach. Recommendation: Where a side reach is provided, locate elements away from corners in...
-
11B-308.3 Side reach.
[See subsections ...]
-
11B-308.3 Side reach
[See subsections ...]
-
11B-306.2.3 Minimum required depth
The toe clearance shall extend 19 inches (483 mm) minimum under sinks required to be accessible by Section 11B-212.3. 2. ...
-
11B-306.2.3 Minimum required depth
Exceptions: The toe clearance shall extend 19 inches (483 mm) minimum under sinks required to be accessible by Section 11B-212.3....
-
308.3.1 Unobstructed
An obstruction shall be permitted between the clear floor or ground space and the element where the depth of the obstruction is 10 inches (255 mm) maximum. 2....
-
11B-805.6 Hand washing fixtures, lavatories and sinks
This applies only where the sink is the actual workstation. Example: A sink used exclusively for cleaning endoscopes. ...
-
11B-805.6 Hand washing fixtures, lavatories and sinks
Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth...
-
11B-805.6 Hand washing fixtures, lavatories and sinks
Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth...
-
Moen M-DURA Chrome Two-Handle Service Sink Faucet 8124
-
Moen M-DURA Chrome Two-Handle Service Sink Faucet 8232
-
1133A.4.1, Item 4
Finished flooring shall be extended to the wall beneath the sink and work surface....
