Designers must consider the position of the opening in relation to the wheelchair space and add clear space and larger openings as necessary....
Search Results "Horizontal Position"
-
Side Entry Openings, and Width and Length of Wheelchair Space
-
38. Is an employer relieved of its obligation to provide reasonable accommodation for an employee with a disability who fails to take medication, to obtain medical treatment, or to use an assistive device (such as a hearing aid)?
on an employee's ability to perform the job.(106) However, if an employee with a disability, with or without reasonable accommodation, cannot perform the essential functions of the position...
-
4. Purpose of Settlement
agree that this Section and other terms of this Settlement Agreement are intended to and shall prevent relitigation of any issues settled herein and that none of the Parties shall take the position...
-
Protruding Objects [4.4]
The diagonal technique involves holding the cane in a stationary position diagonally across the body with the bottom tip at the ground beyond one shoulder and the grip extending beyond the...
-
A4.16.5 Flush Controls
If administrative authorities require flush controls for flush valves to be located in a position that conflicts with the location of the rear grab bar, then that bar may be split or shifted...
-
Clear Floor Space [4.20.2]
For seats at the head of the tub, consider additional clear floor space to allow positioning for side transfers....
-
A4.16.5 FLUSH CONTROLS
If administrative authorities require flush controls for flush valves to be located in a position that conflicts with the location of the rear grab bar, then that bar may be split or shifted...
-
Adult Tricycles
Adult tricycles generally have a comfortable, upright sitting position and three large wheels (approximately 650 mm (26 inches) in diameter), one in front and two in back....
-
§ 37.15 Interpretations and guidance
Written interpretations and guidance constitute the official position of the Department of Transportation, or any of its operating administrations, only if they are issued over the signature...
-
1132A.5.1 General
Maneuvering clearances at interior doors shall provide a minimum length on both sides of the door of at least 42 inches (1067 mm) measured at a right angle to the plane of the door in its closed position...
-
1132A.5.1 General
Maneuvering clearances at interior doors shall provide a minimum length on both sides of the door of at least 42 inches (1067 mm) measured at a right angle to the plane of the door in its closed position...
-
Smith System Lift Desk Work Surface with Crank
Crank its stable work surface up and the Lift Desk easily accommodates work by a student or teacher in the standing position....
-
Sizewise Bari Rehab Platform
The Bari Rehab Platform will transport in any high/low position to assist in reducing the risk of caregiver injury and workers’ compensation claims; it will also go into a Cardio Chair position...
-
American Specialties Adjustable Tilt Mirror 0600T
Designed to provide easy visibility for wheelchair patients or return to upright position. Angle frame fabricated of 18 gauge stainless steel with corners welded and ground smooth....
-
34. Does an employer have to allow an employee with a disability to work at home as a reasonable accommodation?
only if this accommodation would be effective and would not cause an undue hardship.(100) Whether this accommodation is effective will depend on whether the essential functions of the position...
-
Amenities
Exercise machines and equipment shall have a clear floor space complying with 305 positioned for transfer or for use by an individual seated in a wheel chair....
-
Diagonal Curb Ramps
Comments noted that this segment of curb does not have to be horizontally straight to provide such a cue and that achieving straight segments two feet long within marked crossings is very...
-
1117B.5.5, Item 4
Characters and Braille shall be in a horizontal format....
-
R210.3 Shared Use Paths
The AASHTO Guide recommends that fixed objects should not be permitted to protrude within the vertical or horizontal clearance of a shared use path....
-
4.9.4 HANDRAILS
At the bottom, the handrail shall continue to slope for a distance of the width of one tread from the bottom riser; the remainder of the extension shall be horizontal (see Fig. 19(c) and...
-
1013.4 Raised character and braille exit signs
Each exit door through a horizontal exit that is required to comply with Section 1013.1, shall be identified by a sign with the words, “TO EXIT.”...
-
Slopes and Resting Intervals for Outdoor Recreation Access Routes
Slopes are often described as a ratio of vertical distance to horizontal distance, or rise to run....
