Edge protection shall be permitted at the continuous clear openings provided that it is 4 inches (100 mm) high maximum and 2 inches (51 mm) wide maximum....
Search Results "High Speed Rail"
Filters
Commonly Searched Documents
-
Boarding Pier Clearances: ADA Standard Section 1003.3.2
-
1008.2 Accessible Routes
Where accessible routes serve ground level play components, the vertical clearance shall be 80 inches high (2030 mm) minimum....
-
§382.51(a)(6)
The captioning must be high-contrast insofar as is feasible....
-
1008.2 Accessible Routes
Where accessible routes serve ground level play components, the vertical clearance shall be 80 inches high (2030 mm) minimum....
-
407.2.3.2 Car Designations
Tactile characters shall be 2 inches (51 mm) high minimum....
-
7. Grab Bars
Are there two horizontal grab bars (one high/one low) along the side of the tub that are at least 24" long for stabilization and aid in transfer from a wheelchair to the fixed tub seat -...
-
4.35.5 Mirror
Where mirrors are provided in dressing rooms of the same use, then in an accessible dressing room, a full-length mirror, measuring at least 18 in wide by 54 in high (460 mm by 1370 mm),...
-
R406.2 Unobstructed Forward Reach
Where a forward reach is unobstructed, the high forward reach shall be 1220 mm (4.0 ft) maximum and the low forward reach shall be 380 mm (1.25 ft) minimum above the finish surface....
-
M303.2.6 Edge Protection
Where wheelchair spaces are provided on a platform raised more than 1 ½ inches (38 mm) in height, edge protection 2 inches (51 mm) high minimum measured from the surface of the platform...
-
Handrail Requirements
They also would preclude use of panels below handrails, which have become popular in meeting code requirements that prohibit openings in railings through which a 4 inch sphere can pass....
-
Transfer Sides (M301.2.3 and M302.2.3)
The transfer sides are permitted to be obstructed temporarily by features such as armrests, side rails, footrests, and stirrups provided they can be repositioned (e.g., folding armrests,...
-
Annualized Costs to Large Transit Entities for Automated Announcement Systems
Large transit agencies, in turn, are defined in the 2016 Non-Rail Vehicle Guidelines as public transportation providers operating 100 or more buses in annual maximum service in fixed route...
-
11B-502.7.1 Arrangement
Wheelchair users traveling behind parked vehicles may be obscured from the view of drivers backing out of parking spaces, especially when passing behind high-profile vehicles....
-
Mockett SDH1-SSS Sliding Door Hardware Set
Material: High quality stainless steel Surface: Satin Door weight capacity: 150lb Rail bar is 78-3/4" in length. For use with openings of 30" - 44"...
-
Kompan, Inc. Solitaires Spinners - GXY926 - Miram Video
Made for older children and teenagers, Miram is part of Kompan's extensive range of novel, high quality playground equipment....
-
American Standard Yorkville 1.6 gpf Right Height Elongated Pressure Assisted Toilet
Built to stand the test of time and handle years of high use, there is an American Standard commercial toilet that's right for any job....
-
Wagner Instruments Mark-10 M3 Digital Force Gauge
graphic liquid crystal display of: Primary force reading - 5 digit Peak force readings - maximum tension & compression Set point force - programmed high...
-
707.7.2 Characters
Characters shall be 3/16 inch (4.8 mm) high minimum based on the uppercase letter "I"....
-
M303.3.1 Vertical (Section-by-Section Analysis)
The MDE NPRM proposed that for equipment with a change in level at the entry to the wheelchair space, level changes of up to ¼ inch high are permitted to be vertical....
-
R402.4 Reduced Vertical Clearance
Guardrails or other barriers to pedestrian travel shall be provided where the vertical clearance is less than 2 m (6.7 ft) high....
-
C. Door Hardware
Is the door hardware (lever, pull, panic bar, etc.) usable with one hand, without tight grasping, pinching or twisting of the wrist, since many persons with disabilities may not have high...
-
VARIABLE MESSAGE SIGN (VMS) CHARACTERS
High resolution VMS characters have vertical pixel counts of 16 rows or greater. Low resolution VMS characters have vertical pixel counts of 7 to 15 rows....
-
§ 38.23(c)(2) Ramp surface
The ramp surface shall be continuous and slip resistant; shall not have protrusions from the surface greater than 1/4 inch high; shall have a clear width of 30 inches; and shall accommodate...
-
Appendix 3 - Comparison of US Standards to IDEA Center Research
Low Forward Reach 380 125 609 884 464 High...
