other instrumentality of a State or States or local government; and (3) The National Railroad Passenger Corporation, and any commuter authority (as defined in section 103(8) of the Rail...
Search Results "High Speed Rail"
-
PUBLIC ENTITY
-
PUBLIC ENTITY
other instrumentality of a State or States or local government; and (3) The National Railroad Passenger Corporation, and any commuter authority (as defined in section 103(8) of the Rail...
-
11B-604.4 Seats
Seats shall be 2 inches (51 mm) high maximum. [2010 ADAS] 604.4 Seats. ...
-
11B-604.4 Seats
Seats shall be 2 inches (51 mm) high maximum. [2010 ADAS] 604.4 Seats....
-
11B-604.4 Seats
Seats shall be 2 inches (51 mm) high maximum. [2010 ADA Standards] 604.4 Seats....
-
4.24.3 Knee Clearance
Knee clearance that is at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided underneath sinks....
-
4.24.3 KNEE CLEARANCE
Knee clearance that is at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided underneath sinks....
-
M303.3.3.4 Edge Protection
Ramps with drop offs ½ inch (13 mm) or greater shall provide edge protection 2 inches (50 mm) high minimum on each side....
-
Schumacher 1400 Series Limited Use Limited Application (LULA) Elevator
Advantages Automatic controls; commercial grade components and fixtures Two-speed automatic car doors Holeless design does not require excavation for hydraulic cylinder Best...
-
Getting to the Water—Beach Access Routes
The high tide mark is a reasonable location to stop constructed features; they are much more likely to wash out below this point....
-
M303.4.1 Breast Platform Adjustability
Breast platforms shall be continuously adjustable from a low height of 26 inches (660 mm) to a high height of 42 inches (1065 mm) above the floor....
-
Side Partitions and Wing Walls
The bottom edge of panels or partitions must be 27” high maximum....
-
§ 38.23(c)(4) Ramp barriers
Each side of the ramp shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
11B-809.8.1 Door Thresholds
Secondary exterior door thresholds, including sliding door tracks, shall be 3/4 inch (19.1 mm) high maximum with a 1:2 maximum slope....
-
Public Rights-of-Way
These comments addressed roadway design, speed bumps, crosswalks, on-street parking, audible signs and pedestrian signals, and emergency call boxes....
-
The Look of Disability Discrimination
The driver swerves and speeds away....
-
Bug Fix Policies
., speed, resources used to remediate) as any other equivalent loss of function for individuals without disabilities (e.g., an unlabeled button that prevents a blind individual from registering...
-
Data Analyses
Thus, the energy consumption for each surface (oxygen consumption/kilogram of body weight/meter) was standardized relative to subject size (body weight), resting metabolic levels and speed...
-
Skateboards
The variation in sizes results in potential differences in speed, turning radius, and other operational characteristics....
-
11B-904.4.2 Forward approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum shall be provided....
-
11B-904.4.2 Forward approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum shall be provided....
-
What other surface considerations affect wheelchair travel?
If the rolling resistance of flooring is high, wheelchair users must avoid those areas or expend extra energy maneuvering across the surface....
-
4. b. GOVERNMENT ADA PUBLICATIONS AND INFORMATION
and value of doing business with 50 million people with disabilities. www.ada.gov/videogallery.htm#anchor10mistakes990 Available modes: Dial Up (Modem & ISDN) and High...
-
Wheelchairs and other power-driven mobility devices.
The EPAMD can travel up to 12½ miles per hour, compared to the average pedestrian walking speed of 3 to 4 miles per hour and the approximate maximum speed for power-operated wheelchairs...
