If service counters are too high for some users, such as people of short stature and people using wheelchairs, step around counters to provide service....
Search Results "High Speed Rail"
-
General Tips
-
1015.3 Height
Required guards shall not be less than 42 inches (1067 mm) high, measured vertically as follows: From the adjacent walking surfaces....
-
Excel Dryer, Inc. ThinAir®Hand ADA Surface Mounted Hand Dryer TA-ABS
The ThinAir® Hand Dryer is a high-efficiency model that is surface-mounted and ADA compliant....
-
M303.3.3 Ramped
Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3....
-
Platform Height
Platform Height Transfer platforms must be between 16 and 19 inches high, measured from the deck....
-
M303.3.3 Ramped
Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3....
-
Priority 3: Toilet Rooms
Word Fillable Form (2.4MB) Word Non-Fillable Form (2.2MB) PDF Non-Fillable Form (0.7MB)
-
1005.2.1 Height
At least 25 percent of the railings, guards, or handrails shall be 34 inches (865 mm) maximum above the ground or deck surface....
-
D. Unfunded Mandates Reform Act
Since the 2016 Non-Rail Vehicle Guidelines are issued pursuant to the ADA, which prohibits discrimination on the basis of disability, an assessment of the rule’s effect on state, local,...
-
M302.2.3 Transfer Sides
Armrests, footrests, and side rails are examples of obstructions....
-
§ 37.91(e)
(e) On any train in which either a single level or bi-level dining car is used to provide food service, a person providing intercity rail service shall provide appropriate aids and services...
-
Category 2 Eligibility
This eligibility remains even if bus systems covering the area served by the rail system have become 100 percent accessible....
-
Savaria Orion Limited Use/Limited Application Elevator
Orion Elevator The Orion elevator is designed with features you would expect in a high-rise elevator but built for commercial low-rise buildings....
-
303.4 Ramps
Changes in level greater than ½ inch (13 mm) high shall be ramped, and shall comply with 405 or 406....
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3....
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3....
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3....
-
Overview
Overview This publication provides technical assistance on testing accommodations for individuals with disabilities who take standardized exams and other high-stakes tests....
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2. [2010 ADAS] Advisory 303.3 Beveled. ...
-
Common Problem: Protruding Objects
In "high-low" drinking fountain configurations, the "high" fountain often protrudes into a walkway and is not detectable by someone who is blind and who uses a cane. ...
-
303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 303.3 Beveled....
-
3.2.2. Captioning and Audio Description Baselines
The Final RA uses three possible baselines (Low Accessibility, Medium Accessibility, and High Accessibility) that differ depending on the assumptions concerning the prevalence of auditoriums...
-
DEFINITIONS
Access Features Access Laws Accessible Medical Equipment (including high-priority accessible medical equipment) [Clarify that includes imaging equipment as well.]...
-
Three Additional Features for Van-Accessible Parking Spaces
wide designated parking space, a 96 inch wide min. marked access aisle and the following notes) Sign with "van accessible" and the international symbol of accessibility mounted high...
