Title II requires that public entities take several steps designed to achieve compliance. These include the preparation of a self-evaluation....
Search Results "Compliance Review"
-
II-8.1000 General
-
6.2 PV Systems at Existing Parking Facilities
Existing facility has accessible parking - No additional access compliance work required....
-
2.3.1. Hardware Acquisition
The number of auditoriums that are not already equipped to provide closed movie captioning or audio description; The number of new auditoriums opening after the 18-month compliance...
-
36 CFR Part 1190, Proposed Accessibility Guidelines for Pedestrian Facilities in the Public Right-of-Way; Shared Use Paths (SNPRM)
ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD 36 CFR Part 1190 [Docket No....
-
36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM
‒1111 (800) 872‒2253 (voice) • (800) 993‒2822 (TTY) • Fax: (202) 272‒0081 Website: www.access-board.gov • E-mail: ta@access-board.gov ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE...
-
Section 37.139 Plan Contents
We are confident that, through the public participation process, entities can develop a realistic plan for full compliance with the ADA....
-
11B-202.3 Alterations
The details of the finding that full compliance with the requirements is technically infeasible shall be recorded and entered into the files of the enforcing agency....
-
11B-202.3 Alterations
The details of the finding that full compliance with the requirements is technically infeasible shall be recorded and entered into the files of the enforcing agency....
-
Evaluating the Accessibility of a Meeting Site
By reading the descriptions, carefully reviewing the images provided, and considering temporary barrier removal suggestions, organizers can determine whether a meeting place accommodates...
-
Interim Segway® Personal Transporter Policy
GSA will issue a final policy once the effectiveness of the interim policy has been thoroughly reviewed and assessed. ...
-
QUESTION: WHAT CONSTITUTES AN ALTERATION TO A PLATFORM FOR PURPOSES OF TRIGGERING THE APPLICATION OF SECTION 37.42 REQUIREMENTS?
The General Counsel of the Department of Transportation has reviewed this document and approved it as consistent with the language and intent of 49 CFR Part 37....
-
QUESTION: WHEN DO THE REQUIREMENTS OF SECTION 37.42 BEGIN TO APPLY?
The General Counsel of the Department of Transportation has reviewed this document and approved it as consistent with the language and intent of 49 CFR Part 37....
-
General: ADA Standard Section 223.1
Section 223.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for medical care and long-term care facilities.
-
11B-707.4 Privacy
Justice considers the communication-related elements of ATMs to be auxiliary aids and services, rather than structural elements, to which the Safe Harbor allowance for elements built in compliance...
-
104.11 Alternative materials, design and methods of construction and equipment
ETA Editor's Note Sections from the California Building Code Chapter 1 that are not adopted by the Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
11B-707.4 Privacy
Justice considers the communication-related elements of ATMs to be auxiliary aids and services, rather than structural elements, to which the Safe Harbor allowance for elements built in compliance...
-
403.5.2 Clear Width at Turn
EXCEPTION: Where the clear width at the turn is 60 inches (1525 mm) minimum compliance with 403.5.2 shall not be required. Figure 403.5.2 Clear Width at Turn...
-
1.9.1.8 Adopting agency identification
ETA Editor's Note Sections from California Building Code Chapter 1 not adopted by Division of the State Architect - Access Compliance (DSA-AC) omitted. ...
-
11B-403.5.2 Clear width at turn
Exception: Where the clear width at the turn is 60 inches (1524 mm) minimum compliance with Section 11B-403.5.2 shall not be required. FIGURE 11B-403.5.2 CLEAR WIDTH AT TURN...
-
2. Effective Date
On March 15, 2012, compliance with the 2010 Standards will be required for new construction and alterations and barrier removal....
-
Fixtures
For purposes of compliance with TAS 604.3.2, the reference to “fixture” shall mean the plumbing fixtures identified in TAS 213.3 and baby changing tables which are identified as convenience...
-
Gaps
However, if compliance with those measurements is not operationally or structurally feasible, operators may use bridge plates, ramps or other devices....
-
C.7.ii. - Can a federal agency provide alternate web pages for users with disabilities to supplement web pages that have innovative features which are inaccessible to assistive technologies?
be creative and innovative in the use of new technologies, Section 1194.22(k) requires that a text-only web page be provided only as a method of last resort for bringing a web site into compliance...
-
2010 ADA Standards for Accessible Design
Full compliance with the 2010 Standards is required only for new construction and alterations. The web address for the 2010 Standards is in the Resources section....