Section 203.14 covers scoping requirements of general exceptions for raised diving boards and diving platforms in the most current ADA Standards.
Search Results "Path of Travel"
2010 ADA Definition
Path of Travel: From 2010 Title II Regulations section 35.151(b)(4)(ii) & 2010 Title III Regulations section 36.403(e): (1) A "path of travel" includes a continuous, unobstructed way of pedestrian passage by means of which the altered area may be approached, entered, and exited, and which connects the altered area with an exterior approach (including sidewalks, streets, and parking areas), an entrance to the facility, and other parts of the facility.
(2) An accessible path of travel may consist of walks and sidewalks, curb ramps and other interior or exterior pedestrian ramps; clear floor paths through lobbies, corridors, rooms, and other improved areas; parking access aisles; elevators and lifts; or a combination of these elements.
(3) For the purposes of this part, the term "path of travel" also includes the restrooms, telephones, and drinking fountains serving the altered area.
Filters
Commonly Searched Documents
-
Raised Diving Boards and Diving Platforms: ADA Standard Section 203.14
-
Changes in Level: ADA Standard Section 403.4
Section 403.4 covers the current ADA Standards for changes in level on walking surfaces that are part of an accessible route.
-
Minimum Number: ADA Standard Section 234.3
Section 234.3 covers scoping requirements in the current ADA Standards for the minimum number of wheelchair spaces required at amusement rides.
-
General: ADA Standard Section 236.1
Section 236.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for exercise machines and equipment.
-
General: ADA Standard Section 237.1
Section 237.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for fishing piers and platforms.
-
General: ADA Standard Section 224.1
Section 224.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for transient lodging guest rooms.
-
Additions: ADA Standard Section 240.1.1
Section 240.1.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for additions to play areas.
-
Industry Standards
Method for Determining FF Floor Flatness and FL Floor Levelness Numbers ASTM E 1486-98 (2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path...
-
Introduction
Incorporating accessibility into the design of a golf course should begin early in the planning process with careful consideration to the layout of the course, golf car paths, and other...
-
206 Accessible Routes
Common use circulation paths within employee work areas shall comply with 402....
-
Operable Parts of Windows
Scoping provisions in 203.9 exempt employee work areas from the guidelines except for requirements concerning accessible routes, circulation paths, and wiring for visual alarms....
-
§ 382.23 Airport facilities
(c) The carrier shall ensure that there is an accessible path between the gate and the area from which aircraft are boarded....
-
F206.2.4 Spaces and Elements
accessible route shall connect accessible building or facility entrances with all accessible spaces and elements within the building or facility which are otherwise connected by a circulation path...
-
206.2.4 Spaces and Elements
accessible route shall connect accessible building or facility entrances with all accessible spaces and elements within the building or facility which are otherwise connected by a circulation path...
-
"Other Power-Driven Mobility Device" (Section-by-Section Analysis)
Mobility aids that are designed for areas or conditions without defined pedestrian areas, such as off-road bike paths, roads (except where allowed by law or where a sidewalk is not provided...
-
Waviness Index
Waviness Index The Waviness Index, ASTM E 1486, Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria, was developed in response to the...
-
11B-502.6 Identification
. ◼ Exception: Signs located within a circulation path shall be a minimum of 80 inches (2032 mm) above the finish floor or ground surface measured to the bottom of the sign....
-
11B-502.6 Identification
. ◼ Exception: Signs located within a circulation path shall be a minimum of 80 inches (2032 mm) above the finish floor or ground surface measured to the bottom of the sign....
-
Ytterberg Scientific Inc. FloorPro® Floor Flatness Measurement Device
It is a self-propelled, rolling precision inclinometer device that travels 40 ft. [12 m] per minute on hardened stainless steel wheels with an aluminum chassis and parts that are hard anondized...
-
PLACE OF PUBLIC ACCOMMODATION
(5) A bakery, grocery store, clothing store, hardware store, shopping center, or other sales or rental establishment; (6) A laundromat, dry-cleaner, bank, barber shop, beauty shop, travel...
-
‘‘Commerce.’’ (Preamble, Section-by-Section Analysis)
It means travel, trade, traffic, commerce, transportation, or communication among the several States, between any foreign country or any territory or possession and any State, or between...
-
Accessible Amusement Rides
The promise of the ADA...has enabled people with disabilities to enjoy much greater access to a wide range of affordable travel, recreational opportunities and life-enriching services."...
-
Bathroom Do’s and Dont’s
Include bathroom towel bars/hooks within reach of the shower or bench, so an individual does not have to travel across the bathroom using a mobility aid device....
-
Comments
If a denial of one trip makes a second requested trip impossible, then two opportunities to travel required by the regulation have been lost, and should be counted as such....
