Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
Search Results "NFSI: National Floor Safety Institute"
-
11B-405.4 Floor or ground surfaces
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
If Direct Threat to Health or Safety of Others, Limitations May be Imposed
If Direct Threat to Health or Safety of Others, Limitations May be Imposed Only if a passenger with a communicable disease or infection poses a direct threat to the health or safety of...
-
National Institute on Deafness and Other Communication Disorders (NIDCD)
The National Institute on Deafness and Other Communication Disorders (NIDCD), part of the National Institutes of Health (NIH), conducts and supports research in the normal and disordered...
-
7(1)(b)
(b) Clearance between counters and all opposing base cabinets, countertops, appliances or walls is at least 40 inches.
-
7(2)(b)(ii)
(ii) Where the door swings out, a clear space is provided within the bathroom for a person using a wheelchair or other mobility aid to position the wheelchair such that the person is...
-
ADA & Level Boarding Guidance - Platform Height
49 CFR §§37.41-43; 37.9(a), (d); 49 CFR Part 37, App. A (810.5.3) DECEMBER 14, 2011
-
2. a. iv. Path-of-Travel (wheelchair) space allowances
2. a. iv. Path-of-Travel (wheelchair) space allowances.xii In general, a 36” wide accessible route is needed with a slightly larger space provided at corners. If a 180° turn is...
-
4.34.5.2 WATER CLOSETS
[See subsections ...]
-
Seton Custom SetonGlo™ Floor & Stair Identification Signs AV0154
NFPA and ASTM safety standards recommend that identification be posted on Exit doors leading to a staircase SetonGLo Custom 6"W x 6"H photoluminescent signs identify stairs and floor...
-
Floor Designations
The proposed rule specified that tactile floor designations at the hoistway be 60 inches above the floor, measured from the baseline of the characters (407.2.4)....
-
Public Buildings: ADA Standard Section 217.4.2.1
Section 217.4.2.1 covers scoping requirements in the current ADA Standards for TTYs on the floor of a public building.
-
‘‘direct threat’’
A ‘‘direct threat’’ is a significant risk to the health or safety of others that cannot be eliminated by a modification of policies, practices, or procedures, or by the provision of auxiliary...
-
Wooster Products Flexmaster Safety Tread
Inexpensive Easily replaceable Color coordinated surfaces available ADA approved Durable safety surface Glow-in-the-dark capability Longwearing, newly designed, heat treated...
-
11B-902.4.1 Clear floor or ground space
A clear floor space complying with Section 11B-305 positioned for forward approach shall be provided....
-
11B-902.4.1 Clear floor or ground space
A clear floor space complying with Section 11B-305 positioned for forward approach shall be provided....
-
11B-703.8.9 Height above floor
Low resolution VMS characters shall be 40 inches (1016 mm) minimum above the floor of the viewing position, measured to the baseline of the character....
-
11B-703.8.9 Height above floor
Low resolution VMS characters shall be 40 inches (1016 mm) minimum above the floor of the viewing position, measured to the baseline of the character....
-
Common Use Areas in Residential Facilities—Section 203.8 of the 2010 Standards
The only exception would be common use areas provided on upper stories of a non-elevator building provided the same common use areas are provided on the ground floor....
-
2.5 National and International Standards Settings Organizations and MDE Activities
2.5 National and International Standards Settings Organizations and MDE Activities As mentioned in Section 2.4.2, MDE must already meet a variety of standards before it can be marketed...
