L. 101– 336, 42 U.S.C. 12134, and for the reasons set forth in Appendix A to 28 CFR part 35, chapter I of title 28 of the Code of Federal Regulations shall be amended as follows—...
Search Results "L-Shaped Seat"
-
List of Subjects for 28 CFR Part 35
-
Transfer Device
Equipment designed to facilitate the transfer of a person from a wheelchair or other mobility aid to and from an amusement ride seat....
-
World Federation of the Deaf
It’s legal seat is in Helsinki, Finland where the WFD Secretariat operates....
-
Unleash Your Inner Strategist: Diving into the Addictive World of Block Blast
The main objective is to place different shaped blocks onto a grid and complete full rows or columns to clear space and earn points....
-
5.9.1 Standing Supports Recommendation In Reference To Mammography Equipment
To be useful, positioning supports must be shaped for grasping, positioned within reach range of all users, and be 12 inches long minimum when located on the moving c-arm or 18 inches long...
-
Standing Supports [M305.2]
To be useful, positioning supports must shaped for grasping, positioned within the reach range of all users, and be 12 inches long minimum when located on the moving c-arm or 18 inches long...
-
11 [§ 4.7.6]
11 [§ 4.7.6] A built-up curb ramp typically consists of asphalt or concrete that is poured and shaped into a ramp that runs at a 90-degree angle away from an intact curb down to the roadway...
-
2. Background
These descriptions are not intended as exhaustive or scholarly reviews of particular topics but instead as brief summaries of critical contextual issues that helped shape Advisory Committee...
-
Roll-in Access [1014.2.2]
When roll-in access is provided, a turning space at least 60 inches in diameter or a T-shaped space with an arm at least 60 by 36 inches and a base at least 36 inches wide and 24 inches...
-
5.3.2.1 Size
The turning space shall be at least 60 inches (1,525 millimeters) in diameter or T-shaped with a minimum 60- by 36-inch (1,525 by 915 millimeter) arm and a minimum 36-inch (915 millimeter...
-
2. a. iv. Path-of-Travel (wheelchair) space allowances
T-Shaped Space for 180° degree turns C3. Maximum doorway depth and passage width...
-
5.3.2.1 Size
The turning space shall be at least 60 inches (1,525 millimeters) in diameter or T-shaped with a minimum 60- by 36-inch (1,525 by 915 millimeter) arm and a minimum 36-inch (915 millimeter...
-
11B-1008.4.5 Transfer supports
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
11B-1008.4.5 Transfer supports
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
Transfer Supports: ADA Standard Section 1008.4.5
Where play components require transfer to entry points or seats, at least one means of support for transferring shall be provided....
-
TRANSFER DEVICE
[DSA-AC] Equipment designed to facilitate the transfer of a person from a wheelchair or other mobility aid to and from an amusement ride seat....
-
TRANSFER DEVICE
[DSA-AC] Equipment designed to facilitate the transfer of a person from a wheelchair or other mobility aid to and from an amusement ride seat....
-
Temporay Concert Accessibility
They have permanent seating in bleachers with accessible seating as required, etc. ...
-
Flush Controls: ADA Standard Section 604.6
Section 604.6 covers the current ADA Standards for water closets flush controls.
-
Submerged Depth: ADA Standard Section 1009.2.8
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....
-
Shower Enclosures: ADA Standard Section 608.8
Section 608.8 covers the current ADA Standards for enclosures for shower compartments.
-
Clear Floor or Ground Space: ADA Standard Section 903.2
Clear floor or ground space complying with 305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
11B-1009.2.8 Submerged depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (457 mm) minimum below the stationary water level....
