Transfer supports and surfaces adjacent to transfer supports shall be free of sharp or abrasive components and shall have eased edges.
Search Results "Seating Plan"
-
M305.2.5 Surface Hazards
-
M305.2 Transfer Supports
Transfer supports shall comply with M305.2.
-
M305.2 Transfer Supports (Section-by-Section Analysis)
This is an introductory section. As discussed above in Section IV.E.1. (Significant Changes – Transfer Supports), the Access Board strengthened the transfer support requirements and...
-
M305.2.5 Surface Hazards (Section-by-Section Analysis)
The proposed rule did not provide any specific restrictions regarding surface hazards around the transfer supports. No public comments were submitted on this issue, but the MDE...
-
5.4 Transfer Supports
5.4 Transfer Supports.
-
5.4 Transfer Supports Recommendations
5.4 Transfer Supports Recommendations
-
M305.2 Transfer Supports
Transfer supports shall comply with M305.2.
-
§ 35.138(e) Hold-and-release of tickets for accessible seating
(e) Hold-and-release of tickets for accessible seating....
-
Dispersion of Wheelchair Seating Areas (Section-By-Section Analysis and Response to Comments)
- Dispersal of wheelchair seating areas in theaters will be required only where there are more than 300 seats, rather than in all cases....
-
Does a wheelchair user have to use the seat belt and shoulder harness?
Transit operators may establish a policy that requires the seat belt and shoulder harness to be used by all riders, including those who use wheelchairs as well as those who use vehicle seats...
-
§ 35.138(h) Prevention of fraud in purchase of tickets for accessible seating
(h) Prevention of fraud in purchase of tickets for accessible seating....
-
C. Planning Ahead to Provide Effective Communication
Even before someone requests an auxiliary aid or service from your public entity, plan ahead to accommodate the communication needs of persons with disabilities....
-
Does a wheelchair user have to use the seat belt and shoulder harness?
Transit operators may establish a policy that requires the seat belt and shoulder harness to be used by all riders, including those who use wheelchairs as well as those who use vehicle seats...
-
Wheelchair seating locations must be provided in all areas
• Wheelchair seating locations must be provided in all areas including sky boxes and specialty areas....
-
Arizona Developmental Disabilities Planning Council
Who we are A staff of five assists the all-volunteer Arizona Developmental Disabilities Planning Council, which is made up of individuals with disabilities, family members, providers and...
-
Metzler et al. v. Kaiser Foundation Health Plan, Inc. et al
Kaiser Foundation Health Plan, Inc. et al....
-
QUESTION: MUST RAILROADS SUBMIT PLANS FOR MEETING THE PERFORMANCE STANDARD OF SECTION 37.42 ON A STATION-BY-STATION BASIS?
That is, there must be a separate plan for each such station. It is not sufficient to have a generic plan for a line or a system....
-
§ 35.138(h) Prevention of fraudulent purchase of accessible seating
(h) Prevention of fraudulent purchase of accessible seating. A public entity may not require proof of disability before selling a wheelchair space....
-
M305.2.2.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M305.2.2.1 shall be 15 inches (380 mm) long minimum. Transfer supports shall be positioned along 13 ½ inches...
-
M305.2.4.1 Circular Cross Section
Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.
-
M305.2.1.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be capable of supporting transfer on each side of the transfer surface.
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side.
-
M305.2.2.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be 28 inches (710 mm) long minimum and shall be positioned along the width of transfer...
-
Requirement 6 -- Reinforced Walls for Grab Bars
[See subsections ...]
