Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
Search Results "Head End Wall"
-
804.2 Clearance
-
Toilet Rooms-Banquet Area
The toilet centerline of the men's toilet room is 19" from the side wall instead of the required 18". See Standards § 4.16.2....
-
Furniture in Space with Clutter
Freestanding furniture is going to be just as much an issue to navigate through as the architectural walls and the space....
-
J1
If the drinking fountain is a wall-mounted unit, is there clear floor space at least 30 inches wide (36 inches if it is in an alcove) x 48 inches long in front of the drinking fountain and...
-
Protruding Objects [4.31.4]
Protruding Objects [4.31.4] Wall- or post-mounted pay phones and enclosures, due to their location above the standard sweep of canes (i.e., 27 inches high from the floor), can be a hazard...
-
Recessed Doors and Gates [§404.2.4.3]
Recessed Doors and Gates [§404.2.4.3] Thick walls, casework, shelving, columns and other elements can cause doors or gates to be recessed....
-
1133A.4.1, Item 4
Finished flooring shall be extended to the wall beneath the sink and work surface. Exceptions: 1....
-
804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
- Excel Dryer, Inc. CAST Cover Series HANDS ON® Push Button Activated Hand Dryers and Hair Dryers
- Willoughby Industries WAW-2311 AquaWave® Single Station Solid Surface Lavatory System
-
903.3.1.1.1 Exempt locations
Generator and transformer rooms separated from the remainder of the building by walls and floor/ceiling or roof/ceiling assemblies having a fire-resistance rating of not less than 2 hours...
-
Accessible Pathway & Corridor: Minimum Clear Floor Space Required for 360-degree Turn
These data are based on measurements of wheeled mobility users performing 360-degree turns within an enclosed square space built with mock walls....
-
11B-608.2.1 Transfer type shower compartments
Clearance of 36 inches (914 mm) wide minimum by 48 inches (1219 mm) long minimum measured from the control wall shall be provided....
-
11B-404.2.4.3 Recessed doors and gates
A door can be recessed due to wall thickness or because of the placement of casework and other fixed elements adjacent to the doorway....
-
11B-604.6 Flush controls
To prevent causing injury or imbalance, the plumbing can be located behind walls or to the side of the toilet; or if approved by the local authority having jurisdiction, provide a toilet...
-
11B-404.2.4.3 Recessed doors and gates
A door can be recessed due to wall thickness or because of the placement of casework and other fixed elements adjacent to the doorway....
-
11B-604.6 Flush controls
To prevent causing injury or imbalance, the plumbing can be located behind walls or to the side of the toilet; or if approved by the local authority having jurisdiction, provide a toilet...
-
2.2.2 Structural Anthropometry (i.e. Body and WhMD Dimensions)
Posterior most point (head, arm, WhMD, or accessory) Used to measure Occupied Length....
-
TABLE 601 FIRE-RESISTANCE RATING REQUIREMENTS FOR BUILDING ELEMENTS (hours)
HT Ad B Structural framea Including columns, girders, trusses 3b 2b 1 0 1 0 HT 1 0 Bearing walls...
-
Section H: Lifts
(§§410.5, 309.4) H6 Is the clear width of the door opening/gate opening at the end of the lift at least 32"?...
-
Filenames and paths in place of alt-text
This is useful for developers who need to find where they got the file from, but it is useless for end-users of the document who use screen readers....
- SciFit Inclusive Fitness PRO1 - Upper Body Machine
-
Aquatic Recreation Facilities
access to the water is limited to one area and where everyone gets in and out at the same place, must provide at least one accessible means of entry, no matter how many linear feet of pool wall...