TTYs in public buildings shall be provided in accordance with Section 11B-217.4.2.1. TTYs in private buildings shall be provided in accordance with Section 11B-217.4.2.2.
Search Results "Court Floor Holding Cell"
Filters
Commonly Searched Documents
-
11B-217.4.2 Floor requirement
-
Whitehall Mfg. WH2105BAR Bariatric Toilet Siphon Jet Type Off-Floor
14 gage 304 stainless steel off-floor Siphon Jet toilet features reinforced housing to withstand up to 1,000 lbs with optional carrier....
-
Pricilla Rogers, Ph.D., Center on Vision Loss, American Foundation for the Blind
Use the flooring to create a building map such as the use of differences in flooring texture and color contrast. Use of contrast on door frames....
-
1.16 Traditional, sloped-floor or traditional seating
1.16 "Traditional, sloped-floor" or "traditional seating" shall mean and refer to the section of an auditorium in which the seats are not affixed on risers, but are instead affixed to...
-
502.4 Floor or Ground Surfaces
Advisory 502.4 Floor or Ground Surfaces. Access aisles are required to be nearly level in all directions to provide a surface for wheelchair transfer to and from vehicles....
-
502.4 Floor or Ground Surfaces
Advisory 502.4 Floor or Ground Surfaces. Access aisles are required to be nearly level in all directions to provide a surface for wheelchair transfer to and from vehicles....
-
Seton Custom SetonGlo™ Floor & Stair Identification Signs AV0154
NFPA and ASTM safety standards recommend that identification be posted on Exit doors leading to a staircase SetonGLo Custom 6"W x 6"H photoluminescent signs identify stairs and floor...
-
11B-231.4.1 Cubicles and counters
Exception: The detainee side of cubicles or counters at non-contact visiting areas not serving holding cells required to comply with Section 11B-231 shall not be required to comply with...
-
405.9.1 Extended Floor or Ground Surface
The floor or ground surface of the ramp run or landing shall extend 12 inches (305 mm) minimum beyond the inside face of a handrail complying with 505....
-
703.4.1 Height above Finish Floor or Ground
703.4.1 Height above Finish Floor or Ground....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
11B-405.4 Floor or ground surfaces
Floor or ground surfaces of ramp runs shall comply with Section 11B-302. Changes in level other than the running slope and cross slope are not permitted on ramp runs....
-
805 Medical Care and Long-Term Care Facilities
A similar requirement was included for transient lodging guest rooms (806.2.6) and holding and housing cells (807.2.1). Response....
-
Inpro Corporation ENDURANT® Floor-Mounted Overhead-Braced Partitions
Our floor-mounted overhead-braced privacy partitions are manufactured from BioPrism® Solid Surface featuring an industry leading bio-resin blend....
-
703.4.1 Height above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
231 Judicial Facilities
This section covers courthouses and other judicial facilities and provides requirements for courtrooms (231.2), holding cells (231.3), and visiting areas (231.4)....
-
11B-231.4.1 Cubicles and counters
Exception: The detainee side of cubicles or counters at non-contact visiting areas not serving holding cells required to comply with Section 11B-231 shall not be required to comply with...
-
11B-231.4.1 Cubicles and counters
Exception: The detainee side of cubicles or counters at non-contact visiting areas not serving holding cells required to comply with Section 11B-231 shall not be required to comply with...
-
809.5.6 Site, Building, or Floor Entrance
809.5.6 Site, Building, or Floor Entrance....
-
703.5.6 Height from Finish Floor or Ground
703.5.6 Height from Finish Floor or Ground. Visual characters shall be 40 inches (1015 mm) minimum above the finish floor or ground....
