But, it is not clear, how the different standards define these turns. For example, when should one plan for a 360 degree turn as opposed to a 180 degree turn? ...
Search Results "Clear Opening"
-
4.5 Maneuvering Clearances
-
11B-809.10.7.1 Floor space
Exception: The 48-inch (1219 mm) minimum clear width may be reduced to 36 inches (914 mm) minimum for lavatories, cabinets, wing walls, or privacy walls located immediately adjacent to a...
-
Openings, Width and Length of Wheelchair Space
Openings, Width and Length of Wheelchair Space Openings and the width and length of wheelchair spaces need to be considered in relation to each other....
-
Forward Approach
Faucets, controls, and dispensers should be within the usable clear floor space to be within easy reach....
-
Attachment J
with Fig. 28; and a flush control mounted on the “open” side of the toilet’s clear floor space. ...
-
§ 38.123(a)(1)
(1) The minimum clear floor area shall be 35 inches by 60 inches....
-
Accessible Room Set-Up
Accessible Room Set-Up Once an accessible site is selected, it is essential that the meeting room furniture be arranged to allow everyone to fully participate. An accessible floor...
-
Accessible Routes (Exterior and Interior)
Once a voter with a disability arrives at the polling site, there must be an accessible route from the accessible parking, passenger drop-off sites, sidewalks and walkways, and...
-
403.5 Clearances
Walking surfaces shall provide clearances complying with 403.5. EXCEPTION: Within employee work areas, clearances on common use circulation paths shall be permitted to be...
-
Gates, Bars, and Berms
Forest Service-constructed barriers on pedestrian travel routes must have a 32-inch minimum width gap or include a route beside them that will permit passage of a wheelchair....
-
1132A.3, Item 6
6. The width of any component in the means of egress system shall not be less than the minimum width required by Section 1005.
-
Accessible Routes - Interior and Exterior
Accessible Routes - Interior and Exterior Common Problem: Both the exterior pedestrian routes (e.g., sidewalks, walkways and plazas) on a site that people use to travel from...
-
1132A.3, Item 6
6. The width of any component in the means of egress system shall not be less than the minimum width required by Section 1005.
-
403.5 Clearances
Walking surfaces shall provide clearances complying with 403.5. EXCEPTION: Within employee work areas, clearances on common use circulation paths shall be permitted to be...
-
American Standard Acrylic Shroud for American Standard Selectronic Faucets
Fits American Standard Murro™ wall hung lavatories Durable Acrylic material with aesthetically pleasing design Designed to conceal Selectronic control box,...
-
(1)(a)
(a) The minimum clear floor area should be 35 inches (890 mm) by 60 inches (1525 mm)....
-
11B-206.5.3 Transient lodging facilities
passage into and within guest rooms that are not required to provide mobility features complying with Section 11B-806.2 shall comply with Section 11B-404.2.3 _|Doors, Doorways, and Gates; Clear...
-
502.7 Relationship to Accessible Routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
502.7 Relationship to Accessible Routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
1007.5.1 Openness
1007.5.1 Openness. Platform lifts on an accessible means of egress shall not be installed in a fully enclosed hoistway....
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
