Section 216.2 covers scoping requirements in the current ADA Standards for sign designations.
Search Results "Supplemental Requirement"
Commonly Searched Documents
-
Designations: ADA Standard Section 216.2
-
Height: ADA Standard Section 704.4.1
EXCEPTION: Where seats are provided, TTYs shall not be required to comply with 704.4.1. Advisory 704.4.1 Height....
-
Within a Site: ADA Standard Section 206.2.2
Section 206.2.2 covers the scoping requirements for accessible routes within a site in the most current ADA Standards.
-
Horizontal Dispersion: ADA Standard Section 221.2.3.1
Section 221.2.3.1 covers scoping requirements in the current ADA Standards for horizontal Dispersion in assembly areas.
-
Toe Clearance: ADA Standard Section 604.8.1.4
Section 604.8.1.4 covers the current ADA Standards for toe clearance at wheelchair accessible compartments.
-
Toilet Facilities and Bathing Facilities: ADA Standard Section 809.4
No fewer than one of each type of fixture provided shall comply with applicable requirements of 603 through 610....
-
11B-1009.2.1 Pool lift location
Where the entire pool depth is less than 36 inches (914 mm) or greater than 48 inches (1219 mm), compliance with Section 11B-1009.2.1 shall not be required. [2010 ADA Standards] 1. ...
-
11B-707 Automatic teller machines, fare machines and point-of-sale devices
However, for entities covered by the ADA, the Department of Justice regulations that implement the ADA provide additional guidance regarding the relationship between these requirements and...
-
1.9.1.1.2
Leases per se, unless alterations occur, do not directly “trigger” construction code requirements....
-
11B-216.4.2 Areas of refuge and exterior areas for assisted rescue
Signs required by Chapter 10, Section 1009.11 to provide instructions in areas of refuge shall comply with Section 11B-703.5....
-
11B-404.3.2 Maneuvering clearance
Exception: Where automatic doors and gates remain open in the power-off condition, compliance with Section 11B-404.2.4 shall not be required....
-
1009.6.3 Size
Such wheelchair spaces shall not reduce the means of egress minimum width or required capacity....
- Kompan, Inc. Rock-it GXY934
-
Medical Diagnostic Equipment: ADA Standard Section 5.
Review the updated information on the revisions to the ADA Standards regarding medical diagnostic equipment.
-
11B-240.1.1 Additions
Where play areas are designed and constructed in phases, the requirements of Section 11B-240 shall apply to each successive addition so that when the addition is completed, the entire play...
-
11B-226.1 General
Exceptions: Sales counters and service counters shall not be required to comply with Section 11B-902. See Section 11B-227....
-
11B-213.3.1 Toilet compartments
In addition to the compartments required to comply with Section 11B-604.8.1, where six or more toilet compartments are provided, or where the combination of urinals and water closets totals...
-
ASME: ADA Standard Section 105.2.2
Section 105.2.2 of the ADA Standards cover references to the American Society of Mechanical Engineers (ASME) standards.
-
Seats: ADA Standard Section 608.4
Section 608.4 covers the current ADA Standards for seats in shower compartments.
-
Scope: ADA Standard Section 1001.1
The provisions of Chapter 10 shall apply where required by Chapter 2 or where referenced by a requirement in this document. Advisory 1001.1 Scope....
-
Clearances: ADA Standard Section 1002.4.4
Where provided, securement devices shall be permitted to overlap required clearances. 2. Wheelchair spaces shall be permitted to be mechanically or manually repositioned. 3....
-
Pool Lift Location: ADA Standard Section 1009.2.1
Where the entire pool depth is greater than 48 inches (1220 mm), compliance with 1009.2.1 shall not be required. 2....
-
11B-505.3 Continuity
Exception: In assembly areas, ramp handrails adjacent to seating or within the aisle width shall not be required to be continuous in aisles serving seating....
-
11B-403.7 Continuous gradient
ETA Editor's Note CBC requirement 11B-403.7 is not present in the 2010 ADA Standards. Therefore, CBC requirements related to continuous gradients are more stringent....