BEA’s Access Control Push Button is an illuminated access control solution, including a stainless steel faceplate and brightly lit plastic button....
Search Results "Floor Button"
Filters
Commonly Searched Documents
-
BEA Inc. Product Line: ACPB Access Control Push Button (Push to Exit)
-
Maps/floor plans
Maps/floor plans: b. Provide at the front desk tactile maps of the Museum and floor plan that visitors can borrow. See 28 C.F.R. § 36.303....
-
Portable Floor Lifts
Portable Floor Lifts The most common types of lifts in medical settings are portable with a U-shaped base that moves along the floor on wheels....
-
11.1 Q. Under the individual building test, how is the second step of the test performed, which involves measuring the slope of the finished grade between the entrance and applicable arrival points?
A. The slope is measured at ground level from the entrance to the top of the pavement of all vehicular and pedestrian arrival points within 50 feet of the planned entrance, or, if...
-
4.34.5.4 BATHTUBS
If a bathtub is provided, then it shall have the following features:
-
407.4.8.1.3 Floor Arrival
As the car passes a floor and when a car stops at a floor served by the elevator, the corresponding character shall illuminate....
-
407.4.8.1.3 Floor Arrival
As the car passes a floor and when a car stops at a floor served by the elevator, the corresponding character shall illuminate....
-
Maps/floor plans
Maps/floor plans: f....
-
Floor Height [1013.4]
If the tent platform floor is raised above grade, the floor height must be no more than 19 inches when measured from the clear ground space to the tent platform surface....
-
11B-203.9 Employee workstations
employee workstations shall only be required to comply with Sections 11B-207.1 _|Accessible Means of Egress; General|_, 11B-215.3 _|Fire Alarm Systems; Employee Work Areas|_, 11B-302 _|Floor...
-
203.9 Employee Work Areas
work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the finish floor...
-
Methods for Placing a Slope Tool on the Surface
There are several methods that can be used for measuring slopes and cross slopes with a digital slope meter. Each method has advantages and disadvantages.
-
28.1 Q. If an architect or builder chooses to follow the bathroom specifications in Requirement 7...are the other bathrooms in the dwelling unit required to have reinforced walls for grab bars?
A. Yes. Requirement 6 of the Guidelines requires reinforced walls in bathrooms for later installation of grab bars. Even though Requirement 6 was not repeated under Requirement...
-
4.20.2 Floor Space
4.20.2 Floor Space....
-
Outdoor Rinsing Showers [1011.2, 1011.3, and 1011.7]
Outdoor rinsing showers allow people to rinse off sand, dirt, and debris. They are not intended for bathing. Outdoor rinsing showers generally don’t offer privacy and people...
-
7(2)(b)(iv)
(iv) Toilets are located within bathrooms in a manner that permit a grab bar to be installed on one side of the fixture. In locations where toilets are adjacent to walls or bathtubs,...
-
1010.1.5 Floor elevation
There shall be a floor or landing on each side of a door. Such floor or landing shall be at the same elevation on each side of the door....
-
1014.2.1.2 Floor Height
The camp shelter floor at the entrance shall be 19 inches (485 mm) high maximum measured from the clear ground space....
-
1014.2.1.2 Floor Height
The camp shelter floor at the entrance shall be 19 inches (485 mm) high maximum measured from the clear ground space....
-
217.4.2 Floor Requirement
217.4.2 Floor Requirement. TTYs in public buildings shall be provided in accordance with 217.4.2.1. TTYs in private buildings shall be provided in accordance with 217.4.2.2....
-
Clear Floor Space [4.20.2]
Clear Floor Space [4.20.2] Clear floor space at tubs, which is dimensioned according to the approach, may overlap required turning space within the room....
-
Clear Ground Space [1011.2]
A clear ground space must be provided at each outdoor constructed feature. The technical requirements include specific provisions for the size, location, surface, slope, and openings...