(2) Ramp surface. The ramp or bridge plate surface shall be continuous and slip resistant, shall not have protrusions from the surface greater than 1/4 inch high, shall have a clear...
Search Results "Elevator Car Control"
-
§ 38.125(c)(2) Ramp surface
-
§ 38.125(c)(4) Ramp barriers
(4) Ramp barriers. Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off.
-
§ 38.95(c)(6)(i) Requirement
(i) Requirement. When in use for boarding or alighting, the ramp or bridge plate shall be attached to the vehicle, or otherwise prevented from moving such that it is not subject to...
-
413.1 General (Section-by-Section Analysis)
more complex and less “user friendly” compared to the control of other core functions....
-
206.4.3 Entrances from Tunnels or Elevated Walkways
206.4.3 Entrances from Tunnels or Elevated Walkways....
-
Guidelines for Requirement 5
However, the majority of comments requested clarification as to what is meant by "other environmental controls"....
-
§ 38.113(a)(2)
(2) Doorways at ends of cars connecting two adjacent cars, to the maximum extent practicable in accordance with regulations issued under the Federal Railroad Safety Act of 1970 (49 CFR parts...
-
Width: ADA Standard Section 502.3.1
Section 502.3.1 covers the current ADA Standards for the required width of access aisles.
-
11B-502.3.1 Width
Access aisles serving car and van parking spaces shall be 60 inches (1524 mm) wide minimum....
-
11B-502.3.1 Width
Access aisles serving car and van parking spaces shall be 60 inches (1524 mm) wide minimum....
-
Transfer Steps: ADA Standard Section 1008.3.2
Transfer steps shall be provided where movement is intended from transfer platforms to levels with elevated play components required to be on accessible routes....
-
11B-1008.3.2 Transfer steps
Transfer steps shall be provided where movement is intended from transfer platforms to levels with elevated play components required to be on accessible routes....
-
11B-1008.3.2 Transfer steps
Transfer steps shall be provided where movement is intended from transfer platforms to levels with elevated play components required to be on accessible routes....
-
§ 36.404(b)
For example, alterations to floors above or below the accessible ground floor must be accessible regardless of whether the altered facility has an elevator....
-
Sec.36.404(b)
For example, alterations to floors above or below the accessible ground floor must be accessible regardless of whether the altered facility has an elevator....
-
409.1 General
Private residence elevators that are provided within a residential dwelling unit required to provide mobility features complying with 809.2 through 809.4 shall comply with 409 and with ASME...
-
4.1.3(1) ELEVATORS
Where provided, elevators shall comply with 4.10....
-
409.1 General
Private residence elevators that are provided within a residential dwelling unit required to provide mobility features complying with 809.2 through 809.4 shall comply with 409 and with ASME...
-
Automatic Curtain Ltd. Remote Controlled Automatic Roller Shade System I
Features: • Slim designed: weight and volume are 30% less than other similar product • Remote control can manage 8 sets of units without interference of each other • Stops at any position...
-
407.3.1 Tactilely Discernible
Input controls shall be operable by touch and tactilely discernible without activation....
-
907.5.2.3 Visible alarms
Visible alarm notification appliances shall not be required in elevator cars....
-
[F] 907.5.2.3 Visible alarms
Visible alarm notification appliances shall not be required in elevator cars....
-
Automatic Curtain, Ltd. Remote Controlled Automatic Roller Shade System II
Features: • Remote control can manage 5 sets of units without interference of each other • Stops at any position preferred • “Opening position” and “Stop Position” are programmable...
