Surface requirements and clearances facilitate a power grip along the length of handrails. Handrails can have circular or non-circular cross-sections, but must have rounded edges....
Search Results "Bedside Clearance"
-
Handrails Along Walking Surfaces [§403.6, §505]
-
M301 Diagnostic Equipment Used by Patients in Supine, Prone, or Side-Lying Position; M302 Diagnostic Equipment Used by Patients in Seated Position
The sections also include provisions for clearance in and around the base of the equipment for lift compatibility to allow the use of a patient lift by patients with disabilities for whom...
-
Work Areas [4.1.1(3)]
Recommendations: Space for turning within the work area and interior maneuvering clearances at doors, while not required, should be considered, especially where entrapment may be a concern...
-
Pilot Rock AFT Series - End Accessible Traditional A-Frame Picnic Table - Using Recycled Plastic
8 ft. long table is wheelchair accessible at both ends which meet or exceed current ADA guidelines for wheelchair accessibility (30" wide, 27" under table top and 19" knee plus 5" toe clearances...
-
Pilot Rock AFT Series - End Accessible Traditional A-Frame Picnic Table - Using Lumber
8 ft. long table is wheelchair accessible at both ends which meet or exceed current ADA guidelines for wheelchair accessibility (30" wide, 27" under table top and 19" knee plus 5" toe clearances...
-
Kohler® Mazz Single-Handle Pull-Down Sprayer Kitchen Faucet in Vibrant Stainless
Single lever handle is simple to use and makes adjusting water temperature easy High-arc gooseneck spout and 360-degree spout rotation offer superior clearance for filling pots and cleaning...
-
1118B.6
If the side reach is over an obstruction, the reach and clearances shall be as shown in Figure 11B-5D(c)....
-
Automatic Doors and Power Assisted Doors [4.13.12]
Some power-assists are activated by opening the door manually (and must meet ADAAG requirements for maneuvering clearance in 4.13.6 and opening force in 4.13.11) while others may be activated...
-
Designed Use
For example, pack and saddle stock require higher and wider clearances than do hikers, so a trail managed for both foot travel and horse use would have a designed use of "Pack and Saddle...
-
Kitchen Counters, Walls, and Floors
Staggered stud construction to prevent noise transmission to other rooms Zero clearance kitchen entries with less than 1/4” change of elevation throughout the accessible route. ...
-
3.3.10 90-Degree Turn
While all of the standards compared in this report have requirements for “wheelchair turning spaces”, only the U.S. and Canada have requirements specifically for 90-degree or L-Turn clearances...
-
Clear Floor Space: Minimum Clear Floor Space Required - Manual, Power & Scooter
The clear floor area width dimension also informs the minimum clearance width for successful passage through corridors, doorways, and wheelchair ramps....
-
§ 38.77(b)
Handrails shall be placed to provide a minimum 11/2 inches knuckle clearance from the nearest adjacent surface....
-
902 Dining Surfaces and Work Surfaces
Some commenters also recommended a higher minimum height of 29 inches instead of 28 inches to allow a more comfortable knee clearance. Response....
-
Pilot Rock XT Series Side Accessible Picnic Table Using Aluminum
Brace positioning allows wheelchair spaces to meet current ADA clearance guidelines of 30" wide, 27" under table (ground to bottom of table top), and 24" total knee and toe clearances (19...
-
Pilot Rock UT Series Side Accessible Picnic Table Using Aluminum
Brace positioning allows wheelchair spaces to meet current ADA clearance guidelines of 30" wide, 27" under table (ground to bottom of table top), and 24" total knee and toe clearances (19...
-
Pilot Rock XT Series Side Accessible Picnic Table Using Recycled Plastic
Brace positioning allows wheelchair spaces to meet current ADA clearance guidelines of 30" wide, 27" under table (ground to bottom of table top), and 24" total knee and toe clearances (19...
-
Feature 4 - Routes to the Meeting Space
Therefore, objects that do not provide sufficient head clearance or that are mounted too high and protrude into a route can become hazards because they cannot be detected by people who use...
-
226 and 902 Dining Surfaces and Work Surfaces
Section 902.2 requires the provision of accessible knee and toe clearance....
-
PART 3: ACCESSIBLE EXAMINATION ROOMS
The features that make this possible are: an accessible route to and through the room; an entry door with adequate clear width, maneuvering clearance, and accessible hardware;...
-
Notes
The committee recognizes that future visionaries may be able to “re-vision” new devices to provide greater clearances and smaller base supports....
-
Temporary Solutions for Election Day - Hallways and Corridors - Voters Who are Blind or Who Have Low Vision
Problem Two: Ceiling or wall-mounted television monitor has less than 80 inches of clearance between the floor and the bottom of the unit....
-
R404 Clear Spaces (Section-by-Section Analysis)
Clear spaces are permitted to include knee and toe clearance and to be positioned for either forward or parallel approach to an element, unless another requirement specifies otherwise....
-
Mounting Height
It is also consistent with the minimum headroom clearance required for protruding objects....
