Where characters have other cross sections, spacing between individual raised characters shall be 1/16 inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base...
Search Results "Removable Base Cabinet"
-
Character Spacing: ADA Standard Section 703.2.7
-
Dimensions and Capitalization: ADA Standard Section 703.3.1
Table 703.3.1 Braille Dimensions Measurement Range Minimum in Inches Maximum in Inches Dot base diameter 0.059 (1.5 mm) to 0.063 (1.6 mm)...
-
Dispersion: ADA Standard Section 235.2.1
Section 235.2.1 covers scoping requirements in the current ADA Standards for dispersion of boat slips.
-
11B-703.2.7 Character spacing
Where characters have other cross sections, spacing between individual raised characters shall be 1/16 inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base...
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
11B-703.2.7 Character spacing
Where characters have other cross sections, spacing between individual raised characters shall be 1/16 inch (1.6 mm) minimum and 4 times the raised character stroke width maximum at the base...
- BEA Inc. LZR-Microscan Swinging Door Sensor
-
M305.3.2 Height
The height of gripping surfaces for standing supports shall be based on the position of the standing supports in relation to the standing surfaces they serve....
-
404.3.1 Clear Width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
-
§8.4(e)
(e) The obligation to comply with this part is not obviated or alleviated by any State or local law or other requirement that, based on handicap, imposes inconsistent or contradictory prohibitions...
-
A4.2.4 CLEAR FLOOR OR GROUND SPACE FOR WHEELCHAIRS
The space requirements in this standard are based upon maneuvering clearances that will accommodate most larger wheelchairs. Fig....
-
2.4.1
2.4.1 Based on the methods for measuring compliance, define what remedial actions are acceptable when construction elements exceed tolerances....
-
§ 38.159(a)(2) Exception
If portable or station-based lifts, ramps or bridge plates meeting the applicable requirements of this section are provided at stations or other stops required to be accessible under regulations...
-
Polypavement
The Polypavement is applied to a base of compacted native soils and is then mixed into an additional 2 inches of tilled soil....
-
Salsbury Industries See Through Metal Locker
Requires the Registered User plan or above. Login!
-
410.4.2 Digital Wireline (Section-by-Section Analysis)
410.4.2 Digital Wireline (Section-by-Section Analysis) This section proposes that ICT in the form of digital wireline devices (such as VoIP-based office desk telephones) would be required...
-
Free-standing and Post-mounted Objects
This is based on standard measures for cane sweep. Objects with leading edges at or below 27 inches or above 80 inches can protrude any amount....
-
Assumptions
Access Board published values for firmness and stability in the NPRM for Outdoor Developed Areas based on use of the Rotational Penetrometer....
- Pilot Rock T300/T400 Series Round, Pedestal Table With CONTOUR Bench Seats - Using Expanded Steel
- Gaggenau Electric Cooktop CE 490
-
§382.57(c)(7)(ii) Characters
Characters must be 3/16 inch (4.8 mm) high minimum based on the uppercase letter “I.” Characters must contrast with their background with a minimum luminosity contrast ratio of 3:1....
-
§382.43(c)(4)(ii)
(ii) Provide Web-based amenities to the passenger, such as waiving any fee applicable to making a reservation or purchasing a ticket using a method other than your Web site (e.g., by telephone...
-
Pedestrian Signal Phase Timing (Section-by-Section Analysis)
Pedestrian Signal Phase Timing (Section-by-Section Analysis) Pedestrian signal phase timing must comply with referenced MUTCD standards and use a pedestrian clearance time that is calculated based...