Transfer supports and their connections shall be capable of resisting vertical and horizontal forces of 250 pounds (1,112 N) applied at all points on the transfer support.
Search Results "Single Occupant Structure"
-
M305.2.2 Structural Strength
-
610.4 Structural Strength
stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure...
-
610.4 Structural Strength
stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure...
-
Structural Impracticability (Preamble, Section-by-Section Analysis)
Structural Impracticability Proposed § 36.401(c) is included in the final rule with minor changes....
-
Comparison of Single-User Toilet Room “Pairs” With Fixtures Side-by-Side: Plan 1A and Plan 1B
Comparison of Single-User Toilet Room “Pairs” With Fixtures Side-by-Side: Plan 1A and Plan 1B 1991 Standards Plan-1A Pair: 1991 Standards with Out-Swinging...
-
Sec.36.401(c) Exception for structural impracticability
(c) Exception for structural impracticability....
-
III-7.3120 Temporary structures
III−7.3120 Temporary structures (ADAAG §4.1.1(4)). Temporary buildings that are extensively used or are essential for public use are covered....
-
11B-610.4 Structural strength
11B-610.4 Structural strength....
-
§100.305(d)
(d) Newly constructed housing for first occupancy after March 12, 1989 need not comply with the requirements of this section until at least 25 percent of the units are occupied....
-
1018.3 Aisles in Groups B and M
In Group B and M occupancies, the minimum clear aisle width shall be determined by Section 1005.1 for the occupant load served, but shall be not less than that required for corridors by...
-
§104.23(c)(3)
(3) This section does not require recipients to make building alterations that have little likelihood of being accomplished without removing or altering a load-bearing structural member....
-
Structural Impracticability (Section-By-Section Analysis and Response to Comments)
Structural Impracticability (Section-By-Section Analysis and Response to Comments) Proposed Sec.36.401(c) is included in the final rule with minor changes....
-
General description of monetized benefits for water closet clearance in single-user toilet rooms—in-swinging doors (Req. # 32)
For the water closet clearance in single-user toilet rooms with the in-swinging door requirement (Req. #32), the expert panel determined that the primary beneficiaries would be persons who...
-
General description of monetized benefits for water closet clearance in single-user toilet rooms—in-swinging doors (Req. # 32)
For the water closet clearance in single-user toilet rooms with the in-swinging door requirement (Req. #32), the expert panel determined that the primary beneficiaries would be persons who...
-
1017.3 Aisles in Groups B and M
In Group B and M occupancies, the minimum clear aisle width shall be determined by Section 1005.1 for the occupant load served, but shall not be less than 36 inches (914 mm)....
-
1018.3 Aisles in Groups B and M
In Group B and M occupancies, the minimum clear aisle width shall be determined by Section 1005.1 for the occupant load served, but shall not be less than that required for corridors by...
-
1018.5 Aisles in other than assembly spaces and Groups B and M
In other than rooms or spaces used for assembly purposes and Group B and M occupancies, the minimum clear aisle capacity shall be determined by Section 1005.1 for the occupant load served...
-
1018.5 Aisles in other than assembly spaces and Groups B and M
In other than rooms or spaces used for assembly purposes and Group B and M occupancies, the minimum clear aisle capacity shall be determined by Section 1005.1 for the occupant load served...
-
4.1.1(4) Temporary Structures
(4) Temporary Structures. These guidelines cover temporary buildings or facilities as well as permanent facilities....
-
§ 36.401(a)(2)
(2) For purposes of this section, a facility is designed and constructed for first occupancy after January 26, 1993, only –...
-
Sec.36.401(a)(2)
(2) For purposes of this section, a facility is designed and constructed for first occupancy after January 26, 1993, only --...
-
§100.301(b)
(b) Nothing in this part limits the applicability of any reasonable local, State, or Federal restrictions regarding the maximum number of occupants permitted to occupy a dwelling....
-
11B-610.4 Structural strength
stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure...
-
11B-610.4 Structural strength
stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure...