A special button may be provided that would activate the audible signal within the given elevator only for the desired trip, rather than maintaining the audible signal in constant operation...
Search Results "Signal Timing"
Filters
Commonly Searched Documents
-
A4.10.13 CAR POSITION INDICATORS
-
Issue 9: Reach (how far?)
Issue 9: Reach (how far?) APS devices can be located in landscaped areas if the pushbutton is reachable from a level paved area. Figure 12 shows a location where new APS (and new...
-
Issue 5: Tactile arrow (in line)
Issue 5: Tactile arrow (in line) Figure 9: Tactile arrow not aligned with crosswalk direction. Figure 10: Location where tactile arrow is aligned with direction of travel...
-
Car Position Indicators [4.10.13]
Visual and audible signals that indicate car position are required. Verbal announcements are acceptable and can substitute for chimes or other audible signals....
-
4.10.13* Car Position Indicators
As the car passes or stops at a floor served by the elevators, the corresponding numerals shall illuminate, and an audible signal shall sound....
-
4.10.13* CAR POSITION INDICATORS
As the car passes or stops at a floor served by the elevators, the corresponding numerals shall illuminate, and an audible signal shall sound....
-
Door Closing Speed Tool
Door Closing Speed Tool This handy tool was developed by Evan Terry Associates to assist its surveyors in measuring door closing speed. We have this tool in a heavy,...
-
410.6.5 HCO and VCO Support (Section-by-Section Analysis)
410.6.5 HCO and VCO Support (Section-by-Section Analysis) This section proposes that, where ICT provides real-time two-way voice communication, it must permit users to intermix speech...
-
410.6.5 HCO and VCO Support
Real-time voice communication shall permit users to intermix speech with the use of real-time text and shall support modes that are compatible with Hearing Carry Over (HCO) and Voice Carry...
-
Location
Location Pushbutton-integrated APS rely on relative proximity to the crossing location, not on difference in sounds, to clarify which street crossing is being signaled....
-
410.6.3 Interoperability (Section-by-Section Analysis)
410.6.3 Interoperability (Section-by-Section Analysis) This section proposes that, where ICT with real-time two-way voice communication operates outside of a closed network or connects...
-
Two-way Communication [4.3.11.4]
The two-way communication system must be equipped with both audible signals (for people with vision impairments) and visual signals (for people with hearing impairments) and cannot operate...
-
SENSORY PROVISIONS
., increased amplification, increased signal-to-noise ratio, or combination). For transmitted voice signals, provide a gain adjustable up to a minimum of 20 dB gain....
-
§ 38.173(c)
(c) In stations where open platforms are not protected by platform screens, a suitable device or system shall be provided to prevent, deter or warn individuals from stepping off the...
-
Accessible Pittsburgh: Pedestrian Safety
Published on Jun 4, 2015 Updated video on pedestrian safety
-
e-vii
e-vii. Is the elevator equipped with audible tones or bells or verbal annunciators that announce each floor as it is passed? [ADA Standards § 4.10.13] Yes No
-
5f.
5f. Is the elevator equipped with audible tones or bells or verbal annunciators that announce each floor as it is passed? [ADA Stds 4.10.13]
-
B. Proposed 255 Guidelines
Given the trend toward convergence of technologies and ICT networks, the Access Board is updating the 255 Guidelines at the same time that it is updating the 508 Standards....
-
EduCAPTION
EduCAPTION is a leader in providing Broadcast Captioning Services and CART Services [Communication Access Realtime Translation] for the benefit of deaf and hard-of-hearing...
-
410.6.3 Interoperability
Where ICT interoperates outside of a closed system of which it is a part, or where ICT connects to other systems, ICT shall conform to 410.6.3.1 or 410.6.3.2.
-
8.4 Recommendations
The signal-to-noise ratio for internally generated noise cannot be less than 18 dB. 4. The peak clipping levels down from the peak cannot be greater than 18 dB....
-
A. Proposed 508 Standards
Requirement for RTT functionality: The proposed standards would require real-time text (RTT) functionality wherever an ICT product provides real-time, two-way voice communication....
-
2.2.2.2 New York State Standards
* The minimal signal to noise ratio at the receiver's output should not be less than 35 dB. Harmonic distortion shall not be more than 10%....
-
Section I: Elevators
Ward:__________ Precinct:__________ Staff:_______________ Date:_________ Time:_________ Address:_______________________________________ Location name:______________________...
