Showers required by Section 11B-809.10 shall comply with this section....
Search Results "Shower Curb"
-
11B-809.10.6 Showers
-
608.5.1 Transfer Type Shower Compartments
In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1220 mm...
-
1134A.6, Item 5
5. Thresholds. When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units...
-
1134A.6, Item 5
5. Thresholds. When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal...
-
406 Curb Ramps
Section 406 provides requirements specific to curb ramps and also applies requirements for other types of ramps covered by section 405....
-
11B-608.5.3 Alternate roll-in type shower compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located on the side wall of the compartment adjacent to the 16 inches (406 mm) minimum...
-
608.3.2 Standard Roll-In Type Shower Compartments
Where a seat is provided in standard roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall opposite the seat....
-
Where must curb ramps be provided?
Generally, curb ramps are needed wherever a sidewalk or other pedestrian walkway crosses a curb....
-
11B-608.5.3 Alternate roll-in type shower compartments
39 inches (991 mm) to 41 inches (1041 mm) above the shower floor....
-
11B-608.5.3 Alternate roll-in type shower compartments
11B-608.5.3 Alternate roll-in type shower compartments....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
A4.21.1 GENERAL
Shower stalls that are 36 in by 36 in (915 mm by 915 mm) wide provide additional safety to people who have difficulty maintaining balance because all grab bars and walls are within easy...
-
11B-608.8 Shower enclosures
11B-608.8 Shower enclosures. Enclosures for shower compartments shall not obstruct controls, faucets, and shower spray units or obstruct transfer from wheelchairs onto shower seats....
-
P. Roll-in Showers
Roll-in Showers -...
-
B. What Is a Curb Ramp?
A curb ramp is a short ramp cutting through a curb or built up to it.1 If designed and constructed to be accessible, a curb ramp provides an accessible route that people with disabilities...
-
406 Curb Ramps
406 Curb Ramps...
-
11B-406.2.1 Slope
Ramp runs shall have a running slope not steeper than 1:12.
-
11B-406.2.1 Slope
Ramp runs shall have a running slope not steeper than 1:12.
-
11B-608.8 Shower enclosures
Enclosures for shower compartments shall not obstruct controls, faucets, and shower spray units or obstruct transfer from wheelchairs onto shower seats....
-
11B-608.8 Shower enclosures
Enclosures for shower compartments shall not obstruct controls, faucets, and shower spray units or obstruct transfer from wheelchairs onto shower seats....
-
608.3.2 Standard Roll-In Type Shower Compartments
Where a seat is provided in standard roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall opposite the seat....
-
11B-608.5.1 Transfer type shower compartments
In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1219 mm...
-
11B-608.3.2 Standard roll-in type shower compartments
[2010 ADAS] 608.3.2 Standard Roll-In Type Shower Compartments. ...