A curb, 2 inches (51 mm) high minimum, or barrier shall be provided that prevents the passage of a 4 inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102...
Search Results "Shower Curb"
Filters
Commonly Searched Documents
-
11B-405.9.2 Curb or barrier
-
11B-405.9.2 Curb or barrier
A curb or barrier shall be provided that prevents the passage of a 4-inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground...
-
608 Shower Compartments
Section 608 addresses transfer showers and roll-in showers and provides specifications for size and clearances, grab bars, seats, operable parts, shower spray units, thresholds, and enclosures...
-
11B-705.1.2.2.2.1 One entrance/exit point
Where the turning space has one entrance/exit point other than the sloped ramp segments, detectable warnings shall be 36 inches (914 mm) deep, as measured perpendicular to the curb, and...
-
Showers
Several commenters requested that the final Guidelines provide dimensions on the appropriate width and height of showers and shower doors....
-
11B-608.6 Shower spray unit and water
SECTION TITLE NOTES 11B-608.6 Shower spray unit and water....
-
Can curbs be used to indicate areas with less than 80” of vertical clearance?
Curbs may be mistaken for a step or change in level, instead of a barrier....
-
11B-608.9 Shower floor or ground surface
11B-608.9 Shower floor or ground surface. Floor or ground surfaces of showers shall comply with Section 11B-302.1 and shall be sloped 1:48 maximum in any direction....
-
Error/Omission: In hotels, motels, or other lodging facilities of 50 or more sleeping rooms, no rooms with roll-in showers are provided, or the roll-in showers that are provided lack a fold-down seat.
Error/Omission: In hotels, motels, or other lodging facilities of 50 or more sleeping rooms, no rooms with roll-in showers are provided, or the roll-in showers that are provided lack...
-
Curb Ramp Requirements [§406]
Curb Ramp Requirements [§406]...
-
11B-303.5 Warning curbs
changes in level exceeding 4 inches (102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning curbs...
-
4. Curb Ramp Width
4. ...are the curb ramps at least 36" wide, excluding the flared sides, to allow for convenient wheelchair travel?...
-
4.20.6 Shower Unit
4.20.6 Shower Unit. None of the respondents indicated that there were any variations from ADAAG regarding the shower unit....
-
4.20.6 Shower Unit
4.20.6 Shower Unit. None of the respondents indicated that there were any variations from ADAAG regarding the shower unit....
-
11B-406.3 Parallel curb ramps
Parallel curb ramps shall comply with Sections 11B-406.3 and 11B-406.5. A parallel curb ramp may be provided with one sloping segment or two opposing sloping segments....
-
Error/Omission: When a transfer shower is used, it is often larger than the required 36" x 36" size.
Users may slide off the seat and fall onto the floor of the shower while reaching for the shower controls and hand-held showerhead. Requirement: 4.21.2 Size and Clearances....
-
15) Curb ramps
15) Curb ramps ADAAG: Curb ramps must have detectable warnings (which must be raised truncated domes) (§4.7.7). UFAS: No requirement for detectable warnings on curb ramps....
-
Shower
Shower Lowered sidewalls of a roll-in shower. Although not a transfer issue, lowered sidewalls were intended to facilitate assisted showering....
-
11B-406.1.1 Perpendicular curb ramps
Perpendicular curb ramps shall comply with Section 11B-406.2....
-
11B-406.1.2 Parallel curb ramps
Parallel curb ramps shall comply with Section 11B-406.3....
-
11B-406.1.2 Parallel curb ramps
Parallel curb ramps shall comply with Section 11B-406.3....
-
11B-406.1.1 Perpendicular curb ramps
Perpendicular curb ramps shall comply with Section 11B-406.2....
-
11B-406.1.1 Perpendicular curb ramps
Perpendicular curb ramps shall comply with Section 11B-406.2....