. (§402.2) E8 If doors are provided along the route to the voting area, is the clear width of each door opening (one door or one active...
Search Results "Clear Width"
-
Section E: Route from Entrance
-
Section F: Voting Area
Ward:__________ Precinct:__________ Staff:_______________ Date:_________ Time:_________ Address:_______________________________________ Location...
-
Protruding Objects: ADA Standard Section 307
Section 307 covers the current ADA Standards for protruding objects.
-
General: ADA Standard Section 307.1
Section 307.1 of the ADA Standards covers information in the current ADA Standards for protruding objects.
-
Required Clear Width: ADA Standard Section 307.5
Section 307.5 covers the current ADA Standards for protruding objects not reducing the required clear width of an accessible route....
-
SECTION 1018 AISLES
-
SECTION 1018 AISLES
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for...
-
1018.2 Aisles in assembly spaces
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for...
-
1018.3 Aisles in Groups B and M
In Group B and M occupancies, the minimum clear aisle width shall be determined by Section 1005.1 for the occupant load served, but shall be not less than that required for corridors by...
-
1018.5 Aisles in other than assembly spaces and Groups B and M
In other than rooms or spaces used for assembly purposes and Group B and M occupancies, the minimum clear aisle capacity shall be determined by Section 1005.1 for the occupant load served...
-
SECTION 1018 AISLES
-
1018.2 Aisles in assembly spaces
Aisles and aisle accessways serving a room or space used for assembly purposes shall comply with Section 1029. [DSA-AC] In addition to the requirements of this section, means of...
-
1018.3 Aisles in Groups B and M
In Group B and M occupancies, the minimum clear aisle width shall be determined by Section 1005.1 for the occupant load served, but shall not be less than that required for corridors by...
-
1018.5 Aisles in other than assembly spaces and Groups B and M
In other than rooms or spaces used for assembly purposes and Group B and M occupancies, the minimum clear aisle capacity shall be determined by Section 1005.1 for the occupant load served...
-
Accessible Routes - Interior and Exterior
Accessible Routes - Interior and Exterior Common Problem: Both the exterior pedestrian routes (e.g., sidewalks, walkways and plazas) on a site that people use to travel from...
-
1130A.2 Width
The accessible route into and throughout covered multifamily dwelling units shall be at least 36 inches (914 mm) wide.
-
1130A.2 Width
The accessible route into and throughout covered multifamily dwelling units shall be at least 36 inches (914 mm) wide.
-
1132A.3, Item 6
The width of any component in the means of egress system shall not be less than the minimum width required by Section 1005....
-
Feature 2 - Routes to the Building Entrance
Feature 2 - Routes to the Building Entrance Accessible routes connect accessible onsite features (e.g., bus stop, parking) to the building entrance. There must be at least...
-
1009.3 Stairways
In order to be considered part of an accessible means of egress, a stairway between stories shall comply with Sections 1009.3.1 through 1009.3.3. [DSA·AC & HCD 1-AC] In addition,...
-
Clear Width [1016.3]
The clear width of ORARs must be a minimum of 36 inches....
-
1009.7.4 Stairways
Stairways that are part of the means of egress for the exterior area for assisted rescue shall provide a minimum clear width of 48 inches (1220 mm) between handrails....
-
7.3 CHECK-OUT AISLES
Clear aisle width shall comply with 4.2.1 and maximum adjoining counter height shall not exceed 36 in (915 mm) above the floor....
-
7.3(2)
(2) Clear aisle width for accessible check-out aisles shall comply with 4.2.1 and maximum adjoining counter height shall not exceed 38 in (965 mm) above the finish floor....