Thresholds at doorways shall be marked by a stripe....
Search Results "Beveled Threshold"
Filters
Commonly Searched Documents
-
T502.3.2 Thresholds
-
§ 38.125(c)(3) Ramp threshold
(3) Ramp threshold....
-
§ 38.95(c)(3) Ramp threshold
(3) Ramp threshold....
-
VALUATION THRESHOLD
The current valuation threshold is determined by multiplying the baseline valuation threshold by a ratio of the current year’s January CCI to the baseline January 1981 CCI....
-
VALUATION THRESHOLD
The current valuation threshold is determined by multiplying the baseline valuation threshold by a ratio of the current year’s January CCI to the baseline January 1981 CCI....
-
VALUATION THRESHOLD
The current valuation threshold is determined by multiplying the baseline valuation threshold by a ratio of the current year’s January CCI to the baseline January 1981 CCI....
-
M303.3.2 Beveled (Section-by-Section Analysis)
MDE NPRM proposed that for equipment with a change in level at the entry to the wheelchair space, level changes greater than ¼ inch but not greater than ½ inch would be required to be beveled...
-
SafePath: Threshold Ramp Installation for MultiFamily Housing for Disability Access
Door threshold access in Multifamily Housing is never an "adaptable feature" when constructing apartments, condominiums and timeshare units....
-
3.2 Projects with Adjusted Construction Costs Above the Valuation Threshold
3.2 Projects with Adjusted Construction Costs Above the Valuation Threshold: The 20-percent disproportionate cost limitation does not apply to projects with adjusted construction costs above...
-
§ 38.25 Doors, steps and thresholds
[See subsections ...]
-
f-ii
Is the change in level from the floor to the lift surface ramped or beveled? [ADA Standards §§ 4.11.2, 4.5.2] Yes No...
-
E1-2. Accessible Route
Is the accessible route free of steps and abrupt level changes over 1/2 inch (level changes between 1/4 inch and 1/2 inch should be beveled)?...
-
E1-b
Yes No Note: level changes between 1/4 inch and 1/2 inch should be beveled). [ADA Standards §§ 4.1.3(1), 4.3.8]...
-
Changes in Level [4.5.2]
Changes in level ¼ to ½ inch must be beveled with a slope no greater than 1:2....
-
3.1 Disproportionate Costs for Small Projects
• "When the adjusted construction cost is less than or equal to the current valuation threshold, as defined in Chapter 2, Section 202, the cost of compliance with Section 11B-202.4 shall...
-
§ 38.99 Floors, steps and thresholds
[See subsections ...]
-
§ 38.153 Doors, steps and thresholds
[56 FR 45756, Sept. 6, 1991, as amended at 63 FR 51698, 51702, Sept. 28, 1998]
-
1132A.4.1, Item 1
Thresholds with a change in height of not more than ¼ inch (6.35 mm) may be vertical....
-
1132A.4.1, Item 1
Thresholds with a change in height of not more than ¼ inch (6.35 mm) may be vertical....
-
11B-809.8.1 Door Thresholds
Secondary exterior door thresholds, including sliding door tracks, shall be 3/4 inch (19.1 mm) high maximum with a 1:2 maximum slope....
-
Floor or Ground Surface: ADA Standard Section 404.2.4.4
Section 404.2.4.4 covers the current ADA Standards for floor or ground surfaces at door maneuvering clearances.
-
§ 38.79(b)
(b) All thresholds and step edges shall have a band of color(s) running the full width of the step or threshold which contrasts from the step tread and riser or adjacent floor, either light-on-dark...
-
§ 38.99(b)
(b) All thresholds and step edges shall have a band of color(s) running the full width of the step or threshold which contrasts from the step tread and riser or adjacent floor, either light-on-dark...
