Search Results "Transfer Device (Amusement Rides)"

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-205.1 General

  Cleats and other boat securement devices shall not be required to comply with Section 11B-309.3. 8....

• Research and History > Research Documents > Standards and Anthropometry for Wheeled Mobility
  Appendix 2- Photos of Participants in the IDEA Center Research

  Appendix 2- Photos of Participants in the IDEA Center Research Examples of High Seats: Examples of Very Large and Small Clear Floor Area Widths:    Examples of Very...

• Research and History > Research Documents > The Impact of Transfer Setup on the Performance of Independent Transfers: Phase I Final Report
  Executive summary

  Transfers are required for getting to and from the device to bed, bathtub, car seat, among others. ...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.2.4.2 Non-Circular Cross Section

  Transfer supports with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8 inches...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  HOW TO MEASURE TRANSFER HEIGHTS IS IMPORTANT

  HOW TO MEASURE TRANSFER HEIGHTS IS IMPORTANT Many medical examination rooms are equipped with fixed height examination tables, with a typical 32-inch seat height....

• Links > General
  Center on Knowledge Translation for Technology Transfer (KT4TT)
  

  The Center on Knowledge Translation for Technology Transfer (KT4TT) is a program of the Center of Assistive Technology at the University at Buffalo, sponsored by the National Institute on...

• Research and History > Research Documents > Independent Wheelchair Transfers in the Built Environment: How Transfer Setup Impacts Performance Phase 2: Final Report
  Comparison of Transfer Protocols

  A comparison of the 5th, 25th, 50th, 75th and 95th percentiles between the first transfer study and this study are shown in Tables D6 and D7....

• Products and Additional Resources > Products
  Bobrick 24" Straight Grab Bar B-5806 x 24
  

  24" (610mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...

• Products and Additional Resources > Products
  Bobrick 24" Straight Grab Bar B-6806 x 24
  

  24" (610mm) long, 1-1/2" (38mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...

• Products and Additional Resources > Products
  Delta 1-1/2″ x 36″ ADA Grab Bar Concealed Mounting 40136-PS
  

  Product Features and Benefits 36″ long, 1 1/2″ wide Concealed mounting - mounting hardware included 3″ diameter flanges 1 1/2″ wall clearance Limited Faucet and Finish...

• Products and Additional Resources > Products
  Bobrick 36" Straight Grab Bar Peened B-6806.99 x 36
  

  36" (915mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick,...

• Products and Additional Resources > Products
  Bobrick 24" Straight Grab Bar Peened B-5806.99 x 24
  

  24" (610mm) long, 1-1/4" (32mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick,...

• Products and Additional Resources > Products
  Mega Jailhouse Anti-Suicide Grab Bar with Closure Plate 36 inches - Concealed Mounting
  

  Description: This 36" security / anti-suicide grab bar is fabricated in accordance with ADA specifications and is fully enclosed, thereby abating suicide risk.  The grab bar is...

• Products and Additional Resources > Products
  Bobrick 36" Straight Grab Bar B-5806 x 36
  

  36" (915mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...

• Products and Additional Resources > Products
  Bobrick 36" Straight Grab Bar B-6806 x 36
  

  36" (915mm) long, 1-1/2" (38mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1⁄8" (3mm) thick, type 304...

• Products and Additional Resources > Products
  Bobrick 24" Straight Grab Bar Peened B-6806.99 x 24
  

  24" (610mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick,...

• Products and Additional Resources > Products
  Bobrick 36" Straight Grab Bar Peened B-5806.99 x 36
  

  36" (915mm) long, 1-1/4" (32mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick,...

• Federal Documents > Technical Assistance > Title III Technical Assistance Manual (with 1994 supplement)
  III−4.3300 Examples of auxiliary aids and services

  Auxiliary aids and services include a wide range of services and devices that promote effective communication....

• Webinars, Videos, and Training > Product Demonstration or Information
  Intro to Door Hardware: Von Duprin Exit Devices 101
  

  Published on Mar 2, 2015 - This video explains the basics of Von Duprin exit devices....

• Research and History > Research Documents > Independent Wheelchair Transfers in the Built Environment: How Transfer Setup Impacts Performance Phase 2: Final Report
  Questionnaire on Two Step Transfers

  All subjects completed a questionnaire to describe their impressions about performing the two step transfers or to explain the reasons why they did not attempt these transfers. ...