[2010 ADA Standards] 215.4 Transient Lodging. Guest rooms required to comply with 224.4 shall provide alarms complying with 702....
Search Results "Referenced Standard"
-
11B-215.4 Transient lodging
-
11B-809.5.3 Interconnection
[2010 ADA Standards] 809.5.3 Interconnection....
-
11B-223.2 Hospitals, rehabilitation facilities, psychiatric facilities and detoxification facilities
[2010 ADA Standards] 223.2 Hospitals, Rehabilitation Facilities, Psychiatric Facilities and Detoxification Facilities....
-
11B-602.3 Operable parts
[2010 ADA Standards] 602.3 Operable Parts. Operable parts shall comply with 309....
-
11B-805.2.2 Beds
[2010 ADA Standards] 805.3 Clear Floor or Ground Space. A clear floor space complying with 305 shall be provided on each side of the bed....
-
106.5.66 Structural Impracticability
In new construction, full compliance with the requirements of these standards is not required where an entity can demonstrate that it is structurally impracticable to meet the requirements...
-
Toilet Rooms-Special Exhibit Space
See Standards § 4.13.11(2)(b). v....
-
(1) Adjustability: Minimum High Transfer Height
reviewing the comments and other evidence before it, the MDE Advisory Committee recommended a high transfer height requirement of 25 inches noting that: [t]he anthropometric data referenced...
-
Sec. 469.052(a)
(a) The commission shall adopt standards, specifications, and other rules under this chapter that are consistent with standards, specifications, and other rules adopted under federal law...
-
E102.8 TIA (Section-by-Section Analysis)
This is the standard for TTY signals on the public switched telephone network interface (PSTN)....
-
How this guide is organized
Common mistakes are referenced from the Section 1 content to alert you to the things you should try to avoid....
- University of Michigan Transportation Research Institute
-
4. Assess During the Planning, Installation and Maintenance Phases
Each segment of the route should be assessed for compliance with the accessibility standards....
-
2. Executive Summary
DOJ is required to adopt accessibility standards for the design, construction, and alteration of facilities (other than certain transportation facilities) by entities subject to the ADA.6...
-
ADA Requirements
The regulations contain detailed architectural requirements called the ADA Standards for Accessible Design (Standards), 28 C.F.R. pt. 36, Appendix A....
-
§382.57(c)(2) Clear floor or ground space
Department of Justice's 2010 ADA Standards for Accessible Design, 28 CFR 35.104 (defining the “2010 Standards” for title II as the requirements set forth in appendices B and D to 36 CFR...
-
C. Executive Order 13132: Federalism
The MDE Standards do not impose any mandatory requirements on state and local governments....
-
§27.71(k)(2) Clear floor or ground space.
Department of Justice's 2010 ADA Standards for Accessible Design, 28 CFR 35.104 (defining the “2010 Standards” for title II as the requirements set forth in appendices B and D to 36 CFR...
-
§ 27.71(k)(2) Clear floor or ground space
Department of Justice's 2010 ADA Standards for Accessible Design, 28 CFR 35.104 (defining the “2010 Standards” for title II as the requirements set forth in appendices B and D to 36 CFR...
-
§ 382.57(c)(2) Clear floor or ground space
Department of Justice's 2010 ADA Standards for Accessible Design, 28 CFR 35.104 (defining the “2010 Standards” for title II as the requirements set forth in appendices B and D to 36 CFR...
-
V. ACTIONS TO REMEDY NONCOMPLIANCE WITH ACCESSIBILITY REQUIREMENTS
Defendants shall make all architectural modifications in compliance with the ADA and its implementing regulation and the 2010 ADA Standards for Accessible Design (“Standards”). ...
-
Executive Order 13132 (Federalism)
The proposed standards do not impose any mandatory requirements on state and local governments....
-
Section 36.403 Alterations: Path of Travel (Section-by-Section Analysis)
These commenters also stated that they did not believe there was a statutory basis for "grandfathering'' facilities that comply with the 1991 Standards....
-
222 and 803 Dressing, Fitting, and Locker Rooms
The requirements for alterations in the 2010 Standards at section 202.3 do not include the requirement from the 1991 Standards at section 4.1.6(1)(c) that if alterations to single elements...