Employee work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the finish...
Search Results "Finished Grade"
-
11B-203.9 Employee workstations
- Yale 1500 Series Traditional Exit Devices
- Midmark Ritter 222 Barrier-Free® Power Examination Table
- Sargent HC 8800 Rim Exit Device
- Compliance Signs Van Accessible Parking Sign (Green Text on White)
- Outdoor Extreme Mobility Beach Cruiser Powered Wheelchair
- Spectrum Aquatics Aspen Pool Lift
-
Value Contrast (slide 9)
[When] they want to show off the art work, they often make all the finishes the same. So the walls and the floor and the ceilings and even the stands the things are on are all similar....
-
Thresholds at Exterior Doors/Thresholds to Balconies or Decks
The Guidelines further provide that the finished surface of this area, located immediately outside the entry door, may be sloped for drainage, but the sloping may be no more than 1/8 inch...
-
CCDA Accessibility Checklist for Building Inspectors, 2015 Edition
During construction inspection finish product thicknesses such as flooring materials or wall coverings must be considered when reviewing critical accessibility features, including but not...
-
B. The ADA Standards for Accessible Design
A portion of the counter surface that is 36 inches (915 mm) long minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided....
-
[2010 ADAS] 105.2.3 ASTM
per foot value for straight propulsion and for turning less than the average work per foot values for straight propulsion and for turning, respectively, on a hard, smooth surface with a grade...
-
Student Evaluations and Placement Under Section 504
evaluation information is documented and carefully considered.52 In OCR’s investigative experience, school districts sometimes rely on a student’s average, or better-than-average, classroom grades...
- PDQ MR Series Mortise Lock
- Norton Surface Mounted Heavy Duty 9500 Series Door Closer
-
11B-104.1.1 Construction and manufacturing tolerances
result in usable construction, notes and dimensions in construction documents should anticipate expected tolerances so that a required dimensional range is not exceeded by the addition of a finish...
-
11B-104.1.1 Construction and manufacturing tolerances
result in usable construction, notes and dimensions in construction documents should anticipate expected tolerances so that a required dimensional range is not exceeded by the addition of a finish...
- Cal-Royal JHIL Series Interconnected Lockset
-
Protect Your Career with a Professional Home Office Signal
This isn't just a gadget; it is commercial-grade infrastructure for your home office....
- Van Accessible Parking Sign (White Text on Blue)
- Allegion Schlage LT Series Mechanical Locks with Tubular Interconnect
- DORMA 8900 Series Door Closer
- Corbin Russwin Inc. Access 800 AC2 Electrified Door Hardware
-
SIGNALIZATION OF ROUNDABOUTS
Where at-grade crossings are included, they are to be placed away from flared entries or exits. Figure 4 shows an example of a flared entry and exit design....