Where walls and partitions are required to have a minimum 1-hour fire-resistance rating, recessed fixtures shall be installed such that the required fire resistance will not be reduced....
Search Results "Fire and Safety Standard"
Commonly Searched Documents
-
711.3.2 Membrane penetrations
-
11B-407.1 General
Building owners should note that the ASME Safety Code for Elevators and Escalators requires routine maintenance and inspections....
- Balco Inc. IllumiTread Photoluminescent Egress Markings System
-
§ 38.159(d)(7) Seat belt and shoulder harness
For each wheelchair or mobility aid securement device provided, a passenger seat belt and shoulder harness, complying with all applicable provisions of the Federal Motor Vehicle Safety Standards...
-
REPAIR
The definition is clear that repair is limited to work on an item or part and does not apply to a renovation, rehabilitation or renovation to an existing building in the event of fire or...
- Salsbury Industries 61000 Series Single Tier 3 Wide Standard Metal Lockers
- Salsbury Industries 62000 Series Double Tier 1 Wide Standard Metal Lockers
- Salsbury Industries 62000 Series Double Tier 3 Wide Standard Metal Lockers
- Salsbury Industries 63000 Series Triple Tier 3 Wide Standard Metal Lockers
-
1.9.1.7 Reference cited
Government Code Sections 4450 through 4461 and 12955.1(c) and Health and Safety Code Sections 18949.1, 19952 through 19959....
-
Attachment G: Modifications to Newly Constructed Facilities
Attachment G: Modifications to Newly Constructed Facilities
-
Service Animal Permitted to Accompany Passenger on Flight and at Seat Assignment
accompany a passenger with a disability to the passenger’s assigned seat and remain there as long as the animal does not obstruct the aisle or other areas that must remain unobstructed for safety...
-
Assumptions
Assumptions Two industry standard specifications are used to determine the safety and accessibility of each surface: ASTM F1292‒99/04 Standard Specification for Impact Attenuation of...
-
19. Are new play components added to an existing play area required to comply with the Standards even if there is not an accessible route from parking or the street to the play area?
Are new play components added to an existing play area required to comply with the Standards even if there is not an accessible route from parking or the street to the play area?...
-
T403 Lifts
These commenters urged the Access Board to instead reference existing standards for public vehicular lifts set forth in the FMVSS, which are issued by the National Highway Traffic Safety...
-
11B-603.2.3 Door swing
[2010 ADA Standards] 1....
-
Protruding Object
However, safety regulations or Forest Service construction and maintenance standards may define clear space and limit overhangs of natural protruding objects....
-
A4.26.1 GENERAL
The maximum grab bar clearance of 1-1/2 in (38 mm) required in this standard is a safety clearance to prevent injuries from arms slipping through the opening....
-
Protruding Object
However, safety regulations or Forest Service construction and maintenance standards may define clear space and limit overhangs of natural protruding objects....
- PDQ 4200 Series Exit Device Door Hardware
-
Issue: 9-1-1 Systems
People who are deaf or hard of hearing, or those who have speech impairments, and use TTY’s or computer modems for telephone communication are unable to access emergency services (police, fire...
-
AVAILABLE DATA DO NOT SUPPORT DEPARTING FROM THE CURRENTLY ACCEPTED STANDARD OF 19-INCH TRANSFER SURFACE HEIGHT
Some tables may require installation of a modified top to meet the 19” standard but would not require changing out the installed base....
- SDC Sure Exit® PSB560 REX Pressure Sense Exit Bar
-
G.7.iii. - If an agency has a system in place for broadcasting streaming video, is it required to replace it with a system that meets the standards when the next lifecycle upgrade occurs?
Multimedia equipment is considered EIT and must meet the Access Board standards....