Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
Search Results "Clearance Around Base"
Filters
Commonly Searched Documents
-
11B-705.1.1.1 Dome size
-
AISLE
., that provides clearances in in compliance with this code....
-
AISLE
., that provides clearances in compliance with this code....
-
11B-603.2.3 Door swing
Doors shall not swing into the clear floor space or clearance required for any fixture....
-
11B-603.2.3 Door swing
Doors shall not swing into the clear floor space or clearance required for any fixture....
-
Key Title II obligations for state and local government entities
These examples reflect many of the experiences of state and local leaders around the country who have implemented these strategies to comply with the ADA....
-
Position and Hand physiology
An additional issue relative to position was that the frame around the map interfered with reading the Braille....
-
1013.1 General
The technical requirements address the clear ground space around tent pads and tent platforms (1013.2); the slope of tent pads, tent platforms, and clear ground spaces (1013.2); and the...
-
Standards Development
Documenting these solutions will help to advance the field and build a base of support for improving mandatory standards....
-
Accessible Surfaces Located In The Use Zone
located within the use zone, accessible ground surfaces must also be impact attenuating and meet ASTM F 1292-04 Standard Specification for Impact Attenuation of Surface Systems Under and Around...
-
Volume Control Telephones: ADA Standard Section 704.3
Amplifiers on pay phones are located in the base or the handset or are built into the telephone. Most are operated by pressing a button or key....
-
Grab Bars
If only one bar is provided, the clearance must be a minimum of 24 inches on each side of the bar....
-
1009.4.5 Grab Bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
R305.1.1 Dome Size
The truncated domes shall have a base diameter of 23 mm (0.9 in) minimum and 36 mm (1.4 in) maximum, a top diameter of 50 percent of the base diameter minimum and 65 percent of the base...
-
902.2 Clear Floor or Ground Space
Knee and toe clearance complying...
-
11B-1002.5.3 Transfer entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
1002.5.3 Transfer Entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
1002.5.3 Transfer Entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
AISLE
., that provides clearances in in compliance with this code....
-
304.3.1 Circular Space
The space shall be permitted to include knee and toe clearance complying with 306....
-
11B-1002.5.3 Transfer entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
11B-1002.5.3 Transfer entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
Squatty Potty
Squatty Potty wraps perfectly around your existing toilet and easily stores out of the way when not in use. We designed, created, tried and tested and then did it again and again....
-
Populas Infinity Workstation
ANSI HFES requirements and recommendations are based on accepted human factors, ergonomics research and established professional practices....
