Transfer surfaces shall be 21 inches (610 mm) wide minimum and 17 inches (430 mm) deep minimum. The size of transfer surfaces shall be measured from center points of their opposing...
Search Results "Fixed Assembly Seating"
-
M302.2.3 Size
-
M302.3.2 Leg Supports
Where stirrups are provided, leg supports shall also be provided and comply with M305.4.
-
M302.3 Supports
Transfer supports, leg supports and reclining surfaces shall comply with M302.3.
-
M302.2 Transfer Surface
A transfer surface shall be provided and shall comply with M302.2.
-
M302.3.1 Transfer Supports
Transfer supports shall be provided for use with transfer sides required by M302.2.4 and shall comply with M305.2.1.1, M305.2.2.1, and M305.2.3 through M305.2.8.
-
M302.2 Transfer Surface (Section-by-Section Analysis)
This is an introductory section.
-
M302.3 Supports (Section-by-Section Analysis)
This is an introductory section. An editorial change was made to this section as a result of the change in M302.3.2, described below, to replace the word “stirrups” with the term...
-
Accessible Amusement Rides - A Summary of Accessibility Guidelines for Recreation Facilities
United States Access Board Accessible Amusement Rides: A Summary of Accessibility Guidelines for Recreation Facilities This information has been developed and reviewed in...
-
Safety Always Considered
Safety Always Considered You should keep in mind that carriers are obligated to take the safety of all passengers into consideration when making decisions about accommodations for...
-
M302.3.1 Transfer Supports
Transfer supports shall be provided for use with the transfer sides required by M302.2.3 and shall comply with M305.2.
-
M302.2 Transfer Surface
A transfer surface shall be provided and shall comply with M302.2.
-
M302.3 Supports
Transfer supports, armrests, and reclining surfaces shall comply with M302.3.
-
Changes in Level at Entry to Wheelchair Spaces (M303.3)
M303.3 includes technical criteria for changes in level at the entry to a wheelchair space as may occur at wheelchair weight scales with raised platforms. The technical criteria are...
-
Advice for Passengers with Service Animals
or (2) should a passenger request an advance seat assignment (a priority seat such as a (bulkhead seat or aisle seat)) up to 24 hours before departure?...
-
M303 Diagnostic Equipment Used by Patients Seated in a Wheelchair
[See subsections ...]
-
M303 Diagnostic Equipment Used by Patients Seated in a Wheelchair
[See subsections ...]
-
4.1 Wheeled Mobility Device Dimensions
The height of the seat can be measured at the edge and at the middle, under the cushion, or on top of the cushion....
-
M303.2.3 Depth (Section-by-Section Analysis)
Access Board clarifies that this provision is not a clear space requirement for wheelchair approach, but is instead the wheelchair space integral to diagnostic equipment for a patient seated...
-
M301 Diagnostic Equipment Used by Patients in Supine, Prone, or Side-Lying Position; M302 Diagnostic Equipment Used by Patients in Seated Position
technical criteria for diagnostic equipment used by patients in a supine, prone, or sidelying position, and M302 provides technical criteria for diagnostic equipment used by patients in a seated...
-
TOTO® Drake Two-Piece Toilet, 1.6 GPF, Elongated Bowl
• G-Max® fl ushing system, low consumption (1.6GPF/6.0LPF) • Universal Height • Two-piece design with high-profi le tank • Elongated front bowl and tank set, less seat...
-
Outdoor Rinsing Showers [1011.2, 1011.3, and 1011.7]
The hand-held shower spray unit must have a hose at least 59 inches long and at least one fixed position between 15 and 48 inches above the ground (figure 24)....
-
Delta Toilet with FlushIQ Round Front C41903T-WH
electronics and mechanical parts Features ADA compliant chair height bowl to make sitting down and standing up easier 2 in. fully glazed trap-way Round-front bowl with slow-close seat...
-
Knee and Toe Clearance (M303.2.4)
Knee and toe clearance are critical where patients seated in a wheelchair need to position their knees and toes next to or underneath a component of the diagnostic equipment....
-
M303.2.1 Orientation (Section-by-Section Analysis)
The Board did not include requirements for patient body positioning because the diagnostic equipment cannot override the position in which an individual is seated in his or her wheelchair...
