All intercity rail cars required to be accessible by §§38.111 (a) and (e) of this subpart shall provide at least one, but not more than two, mobility aid seating location(s) complying with...
Search Results "Fixed Assembly Seating"
-
§ 38.125(d)(1) Requirements
-
Assembly Areas
Because handrails may interfere with egress where they adjoin seating and since accessible routes are required to connect to wheelchair seating locations, compliance with 4.9, including...
-
§ 35.151(e)(2)
(2) Facilities with more than 50 beds covered by this section that provide common use bathing facilities shall provide at least one roll-in shower with a seat that complies with the relevant...
-
Regulations about Ticket Sales
I attended the "Accessibility Trends in Museums and Performing Arts Venues" session at the National ADA Symposium in May, with expert Betty Siegel of the Kennedy Center for the...
-
Kohler Veil™ One-Piece Elongated Dual-Flush Wall-Hung Toilet With Reveal® Quiet-Close™ Seat
Requires the Premium User plan or above. (Login or upgrade your account!)
- Whitehall Mfg. WH2125A On-Floor Bariatric Stainless Steel Toilet
-
Stages.
Under the current 1991 Standards, a compliant accessible route connecting seating locations to performing areas is permitted to go outside the assembly area and make use of an indirect interior...
- Bobrick B-3091 ClassicSeries® Recessed-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
- Bobrick B-3092 ClassicSeries® Recessed-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
-
15(d)
HWI shall ensure that each Post-1993 Owned Hotel and Post-1993 Joint Venture Hotel has one removable tub seat for each and every accessible tub room in the hotel that does not already have...
-
608.5.2 Standard Roll-In Type Shower Compartments
Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from...
-
§ 38.107(b)
(b) Restrooms required to be accessible shall be in close proximity to at least one seating location for persons using mobility aids and shall be connected to such a space by an unobstructed...
-
11B-608.5.2 Standard roll-in type shower compartments
the seat wall; and shall be located above the grab bar, but no higher than 48 inches (1219 mm) above the shower floor...
-
11B-608.5.2 Standard roll-in type shower compartments
the seat wall; and shall be located above the grab bar, but no higher than 48 inches (1219 mm) above the shower floor...
-
M303.2 Wheelchair Spaces
A wheelchair space can be used to accommodate patients who use wheelchairs as well as other mobility devices and seating....
-
1009.1 Accessible means of egress required
In assembly areas with ramped aisles or stepped aisles, one accessible means of egress is permitted where the common path of egress travel is accessible and meets the requirements in Section...
-
M302.1 General (Section-by-Section Analysis)
The MDE NPRM proposed that all diagnostic equipment used by patients in a seated position must comply with the technical requirements of proposed section M302....
-
608.5.2 Standard Roll-In Type Shower Compartments
Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from...
-
M303.2.1 Orientation
Wheelchair spaces shall be designed so that a patient seated in a wheelchair orients in the same direction that a patient not seated in a wheelchair orients when the diagnostic equipment...
-
M303.2.1 Orientation
Wheelchair spaces shall be designed so that a patient seated in a wheelchair orients in the same direction that a patient not seated in a wheelchair orients when the diagnostic equipment...
- Willoughby Industries ETW-1445-BS-HC Toilet for 45-degree Chase Wall
-
11B-210.1 General
In assembly areas, aisle stairs shall not be required to comply with Section 11B-504 except that striping complying with Section 11B-504.4.1 shall be provided. [2010 ADAS] 3. ...
-
11B-210.1 General
In assembly areas, aisle stairs shall not be required to comply with Section 11B-504 except that striping complying with Section 11B-504.4.1 shall be provided. [2010 ADAS] 3....
-
11B-210.1 General
In assembly areas, aisle stairs shall not be required to comply with Section 11B-504 except that striping complying with Section 11B-504.4.1 shall be provided....