Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
Search Results "Character Height (Raised)"
Filters
Commonly Searched Documents
-
11B-703.3.2 Position
-
Caroma® USA Sydney Low Profile 270 Easy Height Elongated Toilet
A modern concept close coupled 1.6/0.8 gpf (6/3 l) Sydney Low Profile 270 Easy Height Elongated dual flush high efficiency toilet (HET) designed to provide a seat height of between 17" to...
-
703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements....
-
703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements....
-
R410.10 Line Spacing
Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height....
-
California Department of Managed Health Care - Physical Access to Health Care Fact Sheet
If You Use a Wheelchair or Have a Hard Time Walking
-
1011.5.2 Riser height and tread depth
... Exceptions: 4. See California Fire Code Chapter 11 and California Existing Building Code for the replacement of existing stairways. [DSA-AC] For applications listed in...
-
703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements....
-
703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements. ...
-
Directional visual sign vs. room identification tactile sign
If that is how this sign is used, it would be classified as a "visual" sign, and would require conformance with the ADA Standards section 703.5, and would not require the raised lettering...
-
ADA Compliant Plumbing Products for Accessible Kitchens and Baths - CEU Course
The delivery of water raises a variety of design issues and opportunities....
-
1010.1.6 Thresholds
Thresholds at doorways shall not exceed ¾ inch (19.1 mm) in height above the finished floor or landing for sliding doors serving dwelling units or ½ inch (12.7 mm) above the finished floor...
-
T402.8.1 Deployment to Roadways or to Curb Height Boarding and Alighting Areas
The running slope of ramps and bridgeplates used for deployment to the roadway or to curb-height boarding and alighting areas shall be 1:6 maximum, as measured to ground level with the non-rail...
-
II. Summary of Significant Issues Raised By the Public Comments in Response to the Initial Regulatory Flexibility Certification.
Summary of Significant Issues Raised By the Public Comments in Response to the Initial Regulatory Flexibility Certification....
-
5d.
Are raised letters and Braille characters used to identify each floor button and each control? [ADA Stds 4.10.12] Yes _____ No _____...
-
1009.9 Signage
Signage shall comply with Chapter 11A, Section 1143A and Chapter 11B, Section 11B-703.5 _|Signs; Visual Characters|_ as applicable, requirements for visual characters and include the International...
-
1136A.2 Switch and control heights
1136A.2 Switch and control heights. ...
-
11B-226.3 Dining surfaces exceeding 34 inches in height
Where food or drink is served for consumption at a counter exceeding 34 inches (864 mm) in height, a portion of the main counter 60 inches (1525 mm) minimum in length shall be provided in...
-
1100KG HR Digital Platform Scale Extra Wide Handrail with Mechanical Height Rod
Also included is a mechanical height rod allowing users to measure weight and height together. ...
-
11B-411.2.2.1 Visible identification
Above or adjacent to each elevator car entrance there shall be a visible identification fixture with a car designation character....
-
11B-411.2.2.1 Visible identification
Above or adjacent to each elevator car entrance there shall be a visible identification fixture with a car designation character....
-
11B-411.2.2.1 Visible identification
Above or adjacent to each elevator car entrance there shall be a visible identification fixture with a car designation character....
