Designed by MG Studio, SLOPE is offered in stainless steel or powder-coat finishes, and offers a myriad of combinations to suit any customer space and requirement....
Search Results "Non-Glare Finish"
-
SLOPE Waste Receptacles
-
704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (865 mm) minimum above the finish floor....
-
STORY
If the finished floor level directly above a basement or unused under-floor space is more than six feet (1829 mm) above grade for more than 50 percent of the total perimeter or is more than...
-
608.3 Grab Bars
Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
-
704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (865 mm) minimum above the finish floor....
-
610.3 Shower Compartment Seats
The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2....
-
307.2 Protrusion Limits
Objects with leading edges more than 27 inches (685 mm) and not more than 80 inches (2030 mm) above the finish floor or ground shall protrude 4 inches (100 mm) maximum horizontally into...
-
Facility
The tops of dining surfaces and work surfaces shall be 28 inches minimum and 34 inches maximum above the finish floor or ground....
-
Effective Communication
Staff and county officials must take the time to listen to N.M, not interrupt him or finish his sentences....
-
704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (865 mm) minimum above the finish floor....
-
Bathroom Accommodating Reduced Ambulatory Mobility
between the bathtub and toilet (this is actually fun to use) – reinforcement less than $50 Chromatherapy bathtub for relaxation FSC certified maple floor with slip-resistant finish...
-
Kitchen Cabinets
(above finished floor) wall-mounted cabinets and counters for tall people....
-
Door and Gate Surfaces [§404.2.10]
These requirements do not apply to: Sliding doors Doors and gates that do not extend to within 10” of the finish floor or ground Existing doors or gates with kick...
-
STORY
If the finished floor level directly above a basement or unused under-floor space is more than six feet (1829 mm) above grade for more than 50 percent of the total perimeter or is more than...
-
11B-307.2 Protrusion limits
Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...
-
11B-307.2 Protrusion limits
Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...
-
Rockwood Manufacturing Company 70REA Push Plate - .050" Thick 3" x 12" Plate
Ordering: Specify plate number followed by size designation and finish; i.e., 70REA US32D or for non-standard size 70 (width x height) and finish....
-
Rockwood Manufacturing Company 70A Push Plate - .050" Thick 3" x 12" Plate
Ordering: Specify plate number followed by size designation and finish (70A US32D) or for non-standard size 70 (width x height) and finish. Specify any additional optional features....
-
Rockwood Manufacturing Company 71A Push Plate - .062" Thick 3" X 12" Plate
Ordering: Specify plate number followed by size designation and finish; i.e., 71A US32D or for non-standard size 71 (width x height) and finish....
-
Technical Memorandum TM 2017-25 Door and Gate Surfaces
TM 2017-25 Door and Gate Surfaces Effective Date: April 1, 2017 2012 TAS Reference: 404.2.10 404.2.10 requires door and gate surfaces within 10 inches (255mm) of the finish...
-
Pilot Rock SQT3-4 Series Square Portable Table - Using Lumber or Recycled Plastic
The frame design includes our non-tip, non-trip, walk-through features. Tables offer 30" nom. table height; 18" nom. seat height....
-
Paper io – Draw, Defend, Dominate
Opponents can eliminate you by crossing your trail before you finish your loop. Every match is unpredictable and intense....
-
E202.6.1 Required Documentation (Section-by-Section Analysis)
Documenting the exception for commercial non-availability is not a requirement in the existing 508 Standards, though such documentation is mandated under the current federal acquisition...
-
11B-233.3.1.2.4 Multi-story residential dwelling units
In elevator buildings, public housing facilities with multi-story residential dwelling units shall comply with the following: Exception: In non-elevator buildings, a minimum of 10 percent...
