Parking for guests, employees, or other non-residents are subject to the scoping table at 11B-208.2. ◼...
Search Results "Non-Glare Finish"
-
11B-208.2.3 Residential facilities
-
Questions and Answers: Transportation Services for Individuals with Disabilities
The FRA Office of Civil Rights is responsible for civil rights compliance and monitoring to ensure non-discrimination of inter-city rail services....
-
How come some passengers with service animals avoid the bulkhead row?
ANSWER: It is DOT’s understanding that some service animals are trained to curl up underneath a non-bulkhead row airline seat, whereas other service animals are more comfortable in the area...
-
Bedside Clearance [9.2.2(1)]
., closets), and should be provided at non-fixed furnishings (e.g., dressers, tables). An accessible route must connect with the clear floor space....
-
5.4 Dining Areas
In non-elevator buildings, an accessible means of vertical access to the mezzanine is not required under the following conditions: 1) the area of mezzanine seating measures no more than...
-
4.1.4(12) STORAGE
Electrical motors Dry cell batteries Metal parts Empty cans Stoves Washers & Dryers Metal cabinets Glass bottles with noncombustible liquid Mirrors Foods in non-combustible...
-
9.2* POST OFFICE LOBBIES
Avoid designs that call for, or may necessitate, non-fixed partitions in circulation routes of handicapped people....
-
SLOPE Waste Receptacles
Designed by MG Studio, SLOPE is offered in stainless steel or powder-coat finishes, and offers a myriad of combinations to suit any customer space and requirement....
-
704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (865 mm) minimum above the finish floor....
-
STORY
If the finished floor level directly above a basement or unused under-floor space is more than six feet (1829 mm) above grade for more than 50 percent of the total perimeter or is more than...
-
608.3 Grab Bars
Where multiple grab bars are used, required horizontal grab bars shall be installed at the same height above the finish floor....
-
704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (865 mm) minimum above the finish floor....
-
610.3 Shower Compartment Seats
The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2....
-
307.2 Protrusion Limits
Objects with leading edges more than 27 inches (685 mm) and not more than 80 inches (2030 mm) above the finish floor or ground shall protrude 4 inches (100 mm) maximum horizontally into...
-
Facility
The tops of dining surfaces and work surfaces shall be 28 inches minimum and 34 inches maximum above the finish floor or ground....
-
Effective Communication
Staff and county officials must take the time to listen to N.M, not interrupt him or finish his sentences....
-
704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (865 mm) minimum above the finish floor....
-
Bathroom Accommodating Reduced Ambulatory Mobility
between the bathtub and toilet (this is actually fun to use) – reinforcement less than $50 Chromatherapy bathtub for relaxation FSC certified maple floor with slip-resistant finish...
-
Kitchen Cabinets
(above finished floor) wall-mounted cabinets and counters for tall people....
-
Door and Gate Surfaces [§404.2.10]
These requirements do not apply to: Sliding doors Doors and gates that do not extend to within 10” of the finish floor or ground Existing doors or gates with kick...
-
STORY
If the finished floor level directly above a basement or unused under-floor space is more than six feet (1829 mm) above grade for more than 50 percent of the total perimeter or is more than...
-
11B-307.2 Protrusion limits
Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...
-
11B-307.2 Protrusion limits
Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...
