The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm. Figure 304.3.2 T-Shaped Turning Space...
Search Results "Head End Wall"
-
304.3.2 T-Shaped Space
-
11. Appendix D to Part 37 is amended by
Under Section 37.93 remove the period at the end of last sentence in the third paragraph and replace with it comma, and add the following language: “except where doing is necessary to comply...
-
11B-410.6 Doors and gates
End doors and gates shall provide a clear width 32 inches (813 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
Temporary Disabilities
In granting eligibility to such a person, the entity should establish an expiration date for eligibility consistent with the expected end of the period disability....
-
§ 37.213(a)(1)
The operator shall transmit a copy of the form to the passenger no later than the end of the next business day following the receipt of the request....
-
11B-410.6 Doors and gates
End doors and gates shall provide a clear width 32 inches (813 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
Mark J. Mazz, AIA: Architectural Consultant on Accessibility
You have light coming in from two major walls; one’s east, one’s west. The east wall is probably 30 feet high with the sun coming in. You have daylight coming through skylights above....
-
§1607.18 Citations.
When the guidelines are cited in connection with the activities of one of the issuing agencies, a specific citation to the regulations of that agency can be added at the end of the above...
-
222 and 803 Dressing, Fitting, and Locker Rooms
stated that clothing and retail stores would have to expand and reconfigure accessible dressing, fitting and locker rooms to meet the changed provision for clear floor space alongside the end...
-
Notes
The Editorial Committee settled on using the common adjectives “severe” or “extreme” that are employed in many contexts to identify values at the high end of a continuum of values....
-
References
for determination of accessibility of surface systems under and around playground equipment” in 1997 Annual Book of ASTM Standards, Section 15 General Products, Chemical Specialties, and End...
-
Benches
However, armrests on both ends of the bench could prevent a person using a wheelchair from being able to transfer onto the bench....
-
Toilet Buildings and Pit Toilets
54 inches (1,370 millimeters) from the rear wall....
-
11B-804.2.2 U-Shaped
In U-shaped kitchens enclosed on three contiguous sides, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work areas shall be 60 inches (1524...
-
505.10.2 Top Extension at Stairs
Extensions shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight....
-
505.10.3 Bottom Extension at Stairs
Extension shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight....
-
E. Grab Bars
Does each accessible toilet have a horizontal grab bar on the adjacent side wall that is at least 40" long and between 33"-36" above the floor for stabilization and assistance during transfer...
-
F. Grab Bars
Does each accessible toilet have a horizontal grab bar on the wall behind the toilet that is at least 36" long and between 33"-36" above the floor for stabilization and assistance during...
-
M7
[ADA Standards §§ 4.22.2; 4.2.4.1] Yes No Note: In the figure below the clear floor space for the toilet extends at least 66 inches from the back wall....
-
Locker Rooms
Locker Rooms Recommendations: Benches of the required size (24 inches deep and at least 48 inches long) can be integrated with lockers so that back support is provided from a wall....
-
Eliminating Hazards [4.26.4]
Extensions must be rounded or returned to the walls, floors, or posts. Extensions with bottom edges within 27 inches of the floor are detectable within the standard sweep of canes....
-
505.10.2 Top Extension at Stairs
Extensions shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight....
-
505.10.3 Bottom Extension at Stairs
Extension shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight. ...
-
11B-505.10.2 Top extension at stairs
Extensions shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight. ...