A side-wall grab bar complying with 604.5.1 shall be provided on both sides of the compartment. Figure 604.8.2 Ambulatory Accessible Toilet Compartment...
Search Results "Head End Wall"
-
604.8.2.3 Grab Bars
-
11B-608.3 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-608.3.2 or 11B-608.3.3...
-
1136A.1 Receptacle heights
Physical barriers and obstructions shall not extend more than 25 inches (635 mm) from the wall beneath the receptacle....
-
11B-608.3 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-608.3.2 or 11B-608.3.3...
-
1136A.1 Receptacle heights
Physical barriers and obstructions shall not extend more than 25 inches (635 mm) from the wall beneath the receptacle....
-
11B-809.12 Electrical receptacles, controls and switches
Where receptacles are provided in a kitchen at a corner work surface, one receptacle shall be located 36 inches (915 mm) from either wall at the inside corner....
-
11B-608.3 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-608.3.2 or 11B-608.3.3...
-
C. Why are Curb Ramps at Pedestrian Crossings Required?
It is often difficult or impossible for a person using a wheelchair, scooter, walker, or other mobility device to cross a street if the sidewalk on either side of the street ends without...
-
List of Subjects for 28 CFR Part 36
Buildings and facilities Business and industry Civil rights Individuals with disabilities Penalties Reporting and recordkeeping requirements End...
-
608.2.3 Alternate Roll-In Type Shower Compartments
A 36 inch (915 mm) wide minimum entry shall be provided at one end of the long side of the compartment....
-
LULA Elevator Dimensions
The guidelines specify that LULA elevator cars be at least 42 inches wide and 54 inches deep with a door on the narrow end providing at least 32 inches clear width (408.4.1)....
-
R309.2 Parallel Parking Spaces
Accessible parallel parking spaces located at the end of the block face are usable by vans that have rear lifts and cars that have scooter platforms....
-
§8.27(a)
To this end, when an accessible unit becomes vacant, the owner or manager before offering such units to a non-handicapped applicant shall offer such unit:...
-
3. Measuring Door Openings
Place the end of the tape measure on the side of the door frame next to the clear opening (see below). Stretch the tape across the door opening to the face of the door....
-
Question 11
Should the replacement of inaccessible medical equipment or furniture be triggered only by the end of the useful life of the equipment or furniture?...
-
304.3.2 T-Shaped Space
The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm....
-
R212.6 Benches
The clear space shall be located either at one end of the bench or shall not overlap the area within 460 mm (1.5 ft) from the front edge of the bench....
-
304.3.2 T-Shaped Space
The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm....
-
11B-502.6.4.1
a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking space and its lower corner at, or lower side aligned with, the end...
-
304.3.2 T-Shaped Space
The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm....
-
Guidelines for Requirement 6
The Guidelines for Requirement 6 present design standards for installation of reinforcement in bathroom walls to allow for later installation of grab bars around the toilet, tub, shower...
-
11B-604.3.2 Overlap
Exception: In residential dwelling units, a lavatory complying with Section 11B-606 shall be permitted on the rear wall 26 inches (660 mm) minimum from the water closet centerline to allow...
-
11B-805.7 Built-in cabinets and work surfaces
California, issued Code Application Notice CAN 2-11B, dated 9/9/14, which includes the following interpretation of Section 11B-805.7: Built-in equipment consoles include recessed or wall...
-
11B-805.7 Built-in cabinets and work surfaces
California, issued Code Application Notice CAN 2-11B, dated 9/9/14, which includes the following interpretation of Section 11B-805.7: Built-in equipment consoles include recessed or wall...