Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3.
Search Results "Vertical Platform Lift"
Filters
Commonly Searched Documents
-
M303.3.3 Ramped
-
M303.3.3 Ramped (Section-by-Section Analysis)
The MDE NPRM proposed that for equipment with a change in level at the entry of a wheelchair space, level changes greater than ½ inch high would be required to be ramped and comply...
-
Associated Constructed Feature
Associated Constructed Feature—A constructed element associated with a trail that provides support for trail users but is not a part of the trail tread. Examples include camp...
-
M303.3.3 Ramped
Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3.
-
M303.3.3.4 Edge Protection
Ramps with drop offs ½ inch (13 mm) or greater shall provide edge protection 2 inches (50 mm) high minimum on each side.
-
11B.707.7.1.1 Vertically mounted display screen
Where display screens are mounted vertically or tipped away from the viewer less than 30 degrees, the center line of the display screen and other display devices shall be no more than 52...
-
11B-703.7.2.6.4 Edges and vertices on geometric symbols
Vertices shall be radiused between 1/8 inch (3.2 mm) minimum and ¼ inch (6.4 mm) maximum....
-
Overview
Large pools must have two accessible means of entry, with at least one being a pool lift or sloped entry; smaller pools are only required to have one accessible means of entry, provided...
-
11B-303.2 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical and without edge treatment. [2010 ADAS] 303.2 Vertical. ...
-
11B-303.2 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical and without edge treatment. [2010 ADA Standards] 303.2 Vertical....
-
Interior Routes
Exposed edges securely fastened with trim on exposed edge. 11B-302.2 Vertical clearances/protrusions along circulation paths. 11B-307...
-
Interior Routes
Exposed edges securely fastened with trim on exposed edge. 11B-302.2 Vertical clearances/protrusions along circulation paths. 11B-307...
-
Vertical Surface Discontinuities
Vertical Surface Discontinuities. Vertical differences in level between two adjacent surfaces....
-
Master Bath
Unglazed ceramic mosaic tile for slip resistance Sink adaptable to a seated position Reinforcement for ceiling lift from the bed to the bathtub and toilet Grab...
-
Certain Sports/ Recreation and Other Structures (§203.10 - §203.14)
are also exempt: raised structures used solely for refereeing, judging, or scoring a sport raised boxing/ wrestling rings water slides and raised diving boards/ platforms...
-
4.6 Swimming Pools
It is best to have 2 accessible ways to enter a pool, and one of the ways should be a lift....
-
Guest Rooms
Avoid solid-sided bed frames or platforms. Use bed frames with open space between the floor and mattress to allow the use of portable lifts....
-
A. Arena Assembly Seating:
PSE shall provide at least 99 wheelchair accessible seats in The Palace in compliance with the wheelchair space requirements set forth in §802.1 of the 2010 Standards, in...
-
Bradley Grab Bars 1 1/2" with Concealed Mounting 812
1½" O.D. heavy duty stainless steel grab bar with concealed mounting: Product Materials FLANGES: 3 1/8" dia. 13 gauge stainless steel. ESCUTCHEONS: 22 gauge stainless...
-
Comfort Designs Comfort Care™ Grab Bars
Now you don’t have to compromise strength for warmth or softness for durability. With ComfortCare™ you can get it all with a lifetime warranty. Properly installed as original...
-
Murdock Manufacturing Grab Bars
Grab bar is 1-1/2 inch (3.81 cm) diameter satin finish stainless steel and have 1-1/2 inch (3.81 cm) clearance to wall. Grab bars are designed to support a load of at least 250...
-
III-6.2000 Alterations: Path of travel
III−6.2000 Alterations: Path of travel. When an alteration is made to a "primary function area," not only must that alteration be done in compliance with ADAAG, but there must also...
-
2.8 Aircraft and Air Carrier Facility Accessibility.
Lifts, ramps, or other suitable devices not normally used for the movement of freight must be available, if the terminals at such airports are not equipped with passenger loading bridges...
-
R302.7.2 Vertical Surface Discontinuities
R302.7.2 Vertical Surface Discontinuities. Vertical surface discontinuities shall be 13 mm (0.5 in) maximum....
