Landings shall comply with Section 11B-302. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved.
Search Results "Vehicle Ramp"
-
11B-405.7.1 Slope
-
What types of exemptions or exceptions exist?
Compliance with these provisions is not required where EVCS are not available to the general public and intended for use by a designated vehicle or driver (see CBC Section 11B-228.3.2 Exception...
-
§ 38.125(c)(6)(ii) Exception
Ramps or bridge plates which are attached to, and deployed from, station platforms are permitted in lieu of car devices provided they meet the displacement requirements of paragraph (c)(...
-
Temporary Suspension
Temporary Suspension In response to business and user concerns about the need for the detectable warnings specified in 4.29 at curb ramps and hazardous vehicular areas, the Access Board...
-
5.9.2 Standing Supports on Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
5.9.2 Standing Supports on Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations...
-
QUANTUM
Once the vehicle stops at a destination, the button is pressed again to release the passenger so they can disembark....
-
R304.5.1.2 Shared Use Paths
In shared use paths, the width of curb ramps runs and blended transitions shall be equal to the width of the shared use path....
-
ABBREVIATIONS:
The following abbreviations are used in this document: ADA: Americans with Disabilities Act EV: Electric Vehicle CBC: California Building...
-
seca 676 r Digital Wheelchair Scale with Handrail and Integrated RS232 Interface
Two ramps included. Pre-TARE function with three memory cells....
-
Non-Circular Cross Sections: ADA Standard Section 505.7.2
Section 505.7.2 covers the current ADA Standards for the non-circular cross section of handrail gripping surfaces.
-
11B-505.7.2 Non-circular cross sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (102 mm) minimum and 6¼ inches (159 mm) maximum, and a cross-section...
-
11B-505.7.2 Non-circular cross sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (102 mm) minimum and 6¼ inches (159 mm) maximum, and a cross-section...
-
1.3 Previous Research
were more difficult to detect than steeper ramps....
-
E. Level Surface
Are the level surfaces of accessible parking spaces and access aisles free of "built-up" curb ramps so persons who use mobility aids (e.g.: wheelchairs, walkers or crutches) can make convenient...
-
seca 684 r Digital Multifunctional Scale with Integrated RS232 Interface
Ramp seca 470 included. TARE, Auto-HOLD and damping function. Integrated transport castors allow for easy mobility....
-
Floor or Ground Surfaces: ADA Standard Section 502.4
Section 502.4 covers the current ADA Standards for the floor or ground surfaces of accessible parking spaces.
-
Portable ramp - step 6 inches or less
[See subsections ...]
-
Question 1
Are all accessible parking spaces, access aisles, curb ramps, and connecting accessible routes clear of obstacles including vehicles without proper designation, shopping carts, gravel, snow...
-
11B-208.1 General
For the purposes of this section, electric vehicle charging stations are not parking spaces; see Section 11B-228. Exceptions: 1....
-
11B-812.7.2 Marking
Access aisles at vehicle spaces shall be marked with a painted borderline around their perimeter....
-
Elevated Accessible Routes
Two common methods for providing access to elevated play components are ramps and transfer systems....
-
4.1.7(1)(a) General Rule
application sections 5 through 10 unless it is determined in accordance with the procedures in 4.1.7(2) that compliance with the requirements for accessible routes (exterior and interior), ramps...
-
1.1.5
1.1.5 A maximum design cross slope for accessible exterior pedestrian paving and ramps of 1.5% (1:67 or about 3/16 in. per ft. [15 mm per m]) is recommended....
