finished floor or ground surface measured to the bottom of the sign and which bears the international symbol of accessibility the caption "PARKING BY DISABLED PERMIT ONLY."...
Search Results "Pedestrian Sign"
-
502.6.1
-
Flange way gap
For rail projects, no flange way gap can be greater than 2.5" where passenger circulation paths cross tracks at grade (i.e. a street-level pedestrian crossing over streetcar tracks)....
-
Beach Access Point
Beach Access Point—A site at which pedestrian access (such as dune crossings, stairways, walkways, or ramps leading from boardwalks or outdoor recreation access routes) to the beach or parking...
-
SUMMARY OF THE PROPOSED SETTLEMENT AGREEMENT
Throughout that time period, the City will implement a program to improve access to Pedestrian Facilities for people with mobility disabilities....
-
11B-307.3.1 Edges and corners
Where signs or other objects are mounted on posts or pylons, and their bottom edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects...
-
1008.1.9.7, Item 5
A sign shall be provided on the door located above and within 12 inches (305 mm) of the release device reading: “KEEP PUSHING....
-
11B-703.6 Pictograms
Pictograms and other symbols, such as the International Symbol of Accessibility (ISA), which are included on signs with raised characters and Braille are not required to be raised....
-
R302.7.2 Vertical Surface Discontinuities
discontinuities is for occasional expansion joints and objects such as utility covers, vault frames, and gratings that cannot be located in another portion of the sidewalk outside the pedestrian...
-
1. Scope
1.1 This practice covers the mathematical processing of longitudinal profile measurements to produce a pedestrian pathway roughness statistic called the Pathway Roughness Index (PRI)....
-
1010.1.9.7 Delayed egress locks
For doors that swing in the direction of egress, the sign shall read: KEEP PUSHING. THIS DOOR WILL OPEN IN 15 [30] SECONDS....
-
68.10(14) Facility
(14) Facility--All or any portion of buildings, structures, site improvements, elements, and pedestrian routes or vehicular ways located on a site e.g. complexes, equipment, roads, walks...
-
Accessible Routes from Site Arrival Points and Within Sites
site arrival points and accessible facilities within a site from the accessible route requirements where the only means of access between them is a vehicular way that does not provide pedestrian...
-
Problem Four
Problem Four: No sign with the international symbol of accessibility is installed at each accessible parking space....
-
4.1.2(7) Building Signage
Signs which designate permanent rooms and spaces shall comply with 4.30.1, 4.30.4, 4.30.5 and 4.30.6....
-
11B-703.7 Symbols of accessibility
Symbols of accessibility, such as the International Symbol of Accessibility (ISA), which are included on signs with raised characters and Braille are not required to be raised....
-
III-4.3200 Effective communication
There are a number of sign language systems in use by persons who use sign language. (The most common systems of sign language are American Sign Language and signed English.)...
-
R402.2 Protrusion Limits
Objects with leading edges more than 685 mm (2.25 ft) and not more than 2m (6.7 ft) above the finish surface shall protrude 100 mm (4 in) maximum horizontally into pedestrian circulation...
-
Need for Rulemaking
Act that establish the need for accessibility guidelines, the Access Board’s current accessibility guidelines, and why the Access Board is proposing to issue accessibility guidelines for pedestrian...
-
"Other Power-Driven Mobility Device" (Section-by-Section Analysis)
., Segway®), or any mobility aid designed to operate in areas without defined pedestrian routes." ...
-
11B-802.4.2 Identification
Each designated aisle seat shall be identified by a sign or marker with the International Symbol of Accessibility complying with Section 11B-703.7.2.1....
-
Height Above Finish Floor or Ground: ADA Standard Section 703.4.1
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
11B-703.5.1 Finish and contrast
Signs are more legible for persons with low vision when characters contrast as much as possible with their background....
-
11B-703.6.2 Finish and contrast
Signs are more legible for persons with low vision when characters contrast as much as possible with their background....
-
Finish and Contrast: ADA Standard Section 703.5.1
Signs are more legible for persons with low vision when characters contrast as much as possible with their background....