The top of washing machines and clothes dryers shall be permitted to be 36 inches (914 mm) maximum above the finish floor. 2. ...
Search Results "Non-Glare Finish"
Filters
Commonly Searched Documents
-
11B-308.3.2 Obstructed high reach
-
STORY
If the finished floor level directly above a basement or unused under-floor space is more than six feet (1829 mm) above grade for more than 50 percent of the total perimeter or is more than...
-
11B-704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (864 mm) minimum above the finish floor....
-
11B-308.3.2 Obstructed high reach
Exceptions: The top of washing machines and clothes dryers shall be permitted to be 36 inches (914 mm) maximum above the finish floor....
-
11B-606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (864 mm) maximum above the finish floor or ground....
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
What surface characteristics are required of an accessible route?
Because of the great number of variables that affect the performance of a given walking surface--its slope and cross-slope, its material, texture and finish, the presence of moisture or...
-
Supergrit Safety Treads
FEATURES: Extruded aluminum base-abrasive filler Lengths to order, up to 12'-0" (3.66 m) max. in one piece Non-combustible High content of aluminum oxide abrasive 12 standard...
-
What Are Testing Accommodations?
. §§ 36.303(b), 36.309(b)(3) (providing non-exhaustive lists of auxiliary aids and services). ...
-
Private Businesses that Serve the Public: Public Accommodations
These businesses may be large or small and can be for profit or non-profit....
-
Accommodations for Passengers Who are Deaf or Hard of Hearing
[Sec. 382.47(b)(1)] A carrier may use an equivalent non-video alternative to this requirement only if neither open captioning nor a sign language interpreter inset could be placed in the...
-
Visual Alarms [4.28.3]
Visual alarms are not required in areas used solely as employee work areas or in mechanical, electrical, or telephone closets, janitor's closets, or similar non-occupiable spaces....
-
IV. Discussion of Findings and Implications
A playground surface with poured-in-place rubber had a use zone found in non-compliance with the ASTM standard for impact attenuation. ...
-
Error/Omission: Adequate maneuvering clearance is not provided at doors, including doors to accessible toilet stalls.
* Asterisk denotes that related, non-mandatory material is in the Appendix to the Standards....
-
Error/Omission: Parts of an accessible route with slopes that exceed 1:20 lack required features including handrails and edge protection.
* Asterisk denotes that related, non-mandatory material is in the Appendix to the Standards....
-
Section 37.89 Remanufacture of Intercity and Commuter Rail Cars
In addition, this section differs from the counterpart sections for non-rail vehicles and light and rapid rail vehicles in two ways....
-
5.4.6 Transfer Support Gripping Surface Cross Section and Clearances for M301, M302, and M305.2
Grab bars with non-circular cross sections must have a cross section dimension of 2 inches maximum and a perimeter dimension of 4 inches minimum and 4.8 inches maximum....
-
Qualitative and Observational Analysis by Surface Type
in comparison to the larger fines may contribute to more washout or erosion, whereas not enough smaller fines may lead to lots of loose, larger aggregate pieces that can contribute to a non-firm...
-
Meeting User Needs
In fact, this alternative added sufficient flexibility to accommodate independent and assisted transfers that it also was used in non age-segregated healthcare facilities, such as Beechwood...
-
3. How can state and local governments’ employment service systems ensure that people with disabilities have access to competitive integrated employment?
Access to Integration During Non-Work Hours In addition to integrated supported employment services on the job, integration in non-work services also supports the achievement of competitive...
-
11B-703.5.5 Character height
TABLE 11B-703.5.5 VISUAL CHARACTER HEIGHT Height To Finish Floor Or Ground From Baseline Of Character Horizontal Viewing Distance Minimum Character Height...
-
2. Benefits: Qualitative Summary of Benefits
Benefits of the revised accessibility requirements in the 2016 Non-Rail Vehicle Guidelines to persons with disabilities (and others)—while significant—are not quantified or monetized in...
-
Sargent 8200 Mortise Lock with Push/Pull Trim
a functional ligature-resistant solution for behavioral health units Multiple mounting orientations for flexibility and safety Easy door activation offers “hands free” operation Non-handed...
