A single software component may have both platform and non-platform aspects....
Search Results "Non-Glare Finish"
-
Platform Software
-
Platform Software
A single software component may have both platform and non-platform aspects....
-
Platform Software
A single software component may have both platform and non-platform aspects....
-
One Unit Per Floor
fixed unit is intended on a floor, dual access can be provided by: two separate units a combination "hi-lo" unit a fixed unit that is wheelchair accessible and a non-fixed...
-
Platform Software
A single software component may have both platform and non-platform aspects....
-
Alterations
(Lowering existing pay phones for wheelchair access or replacing a non-functioning unit with one of the same type are not considered "alterations" that trigger the requirement for text telephones...
-
Error/Omission: There is no accessible route from accessible parking to an accessible entrance.
* Asterisk denotes that related, non-mandatory material is in the Appendix to the Standards....
-
11B-233.3.1.2.6 Public housing facility site impracticality
Except as provided for in Section 11B-233.3.1.2.5, the provisions of this section do not apply to multistory dwelling units in non-elevator buildings....
-
D. Election Day Compliance Review
The designee shall then send Board personnel to fix the non-compliant implementation of the temporary measures when possible....
-
Mobility
Increase the light, but not too much; you want to reduce glare. What that means is get the light sources out of the line of sight, okay?...
-
National Shelter System
NSS information assists the Red Cross, FEMA, state and local emergency management, and non-government organizations in developing strategies to ensure prompt and effective mass care services...
-
11B-405.9.2 Curb or barrier
inches (51 mm) high minimum, or barrier shall be provided that prevents the passage of a 4 inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish...
-
4.35.4 Bench
The bench shall be mounted 17 in to 19 in (430 mm to 485 mm) above the finish floor....
-
9.5 LOCKER ROOMS
., intended for use by people in wheelchairs shall be located no higher than 48 in (1220 mm) above the finished floor....
-
Signs [ADA Standards §216, §703]
Visual criteria address the height, style, proportion, and spacing of characters, as well as finish and contrast, line spacing, and other features (§703.5)....
-
11B-308.3.1 Unobstructed
approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1219 mm) maximum and the low side reach shall be 15 inches (381 mm) minimum above the finish...
-
606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (865 mm) maximum above the finish floor or ground. EXCEPTIONS: 1....
-
Mary Ann Hay, IALD, LEED™ AP. Artificial Lighting
That really influences the whole perception of glare in the space, the issues of contrast, and making sure that we are providing the appropriate -- I know everybody’s probably tired of...
-
Parking sign height measurement technique
502.6 says "Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign." But which floor or ground surface? ...
-
1010.1.5 Floor elevation
Variations in elevation due to differences in finish materials, but not more than ½ inch (12.7 mm). 5....
-
Willoughby Industries US-HC Cabinet Shower
The construction shall be all-welded (unitized models only, not applicable to knockdown models), exposed stainless surfaces polished to a #4 satin finish, except shower floor which shall...
-
Attachment H
Provide a paper towel dispenser with the controls a maximum height above the finished floor of 48 inches for a forward approach or 54 inches for a side approach and that is accompanied by...
-
Background
We chose adhesive binders for their inert and non-toxic nature in the environment and the retention of a natural look for the surface....
